Re: BIOS ThinkCentre E63z
Thanks I will try it
Thanks I will try it
-
I need a BIOS dump for ThinkCentre M910 Tiny.
The BIOS chip is : Winbond 25Q128JV
Board : IQ2X0IH ver 1.0
I was using a chip clip with my xgecu pro which led to a corrupt BIOS dump, and the BIOS chip was since re-flashed with the donor BIOS from this thread:
https://www.badcaps.net/forum/troubl...nkcentre-m910q
This donor BIOS is not working in my system (because... -
Hie.
I own a Lenovo ideapad v310-15IKB with an i5 7th generation with only Intel graphics configuration.
Now the heart of the problem is that I don't know when or how it happened but I suddenly started getting distortion in the graphics output on the LCD. This basically meant a black screen full of flickering multicolored short horizontal lines. This would happen 30-60 minutes after booting and using it normally.
I run Windows 10 20H build so I thought it was just a Windows update issue or graphics driver outdated issue.
I managed to run Windows troubleshooting and... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,... -
Hello,
I have a Lenovo Thinkbook 15 G2 ITL i5 Laptop (serial number: MP2BFZEF) that when I turn it on, the led on the power button lights up for 5 seconds, then goes out. There's no display and nothing happens.
So I thought it was a Bios problem.
I found 3 bios chips on the board, which I read with a bios programmer: two XMC model bios chips and a Winbond model bios chip. Each XMC model bios chip has two partitions named XM25QH128A [3.3V] and XT25F128A [3.3V]. And the Winbond model bios chip has three partitions named W25Q80BL 3.3V, W25Q80xV 3.3V and W25Q80DV 3.3V.... -
I'm not a super pro like some here, when it comes to firmware. I have a machine with the following specs:
ENVY X360
15-ew0013dx
SN: CND2261KS3
Prod: 698V0UA
Board: LA-M021P Rev 1A
Chip# Winbond 25R128JVSN
Basically, when I power it up, I get no video, and the fans run hard - nothing else. Seems like a BIOS issue to me, so I posted a request in the BIOS request section. I haven't heard anything back(and that's fine) So I tried downloading the BIOS from HP, then I extracted it and flashed it onto the chip. Unfortunately, all I get is the power...10-09-2024, 08:40 AM
Comment