i need bios file HP Pro One 440 G9 12th All-in-one
Help me
-
-
Re: i need unlock password file HP Pro One 440 G9 12th All-in-one
At 1st boot press F10 and RESET BIOS to factory defaults, save, restart and password will go on. After that enter in bios setup and in Main tab you have "set machine unique data" and write there what it's written on the label inside the cover. Or extract DMI from your bios dump:
Feature Byte: 3E6J6S6b7B7J7M7Q7S7W7saBapaqataucAcheMfPfQguk8mFmVn7nVngpDpnpqprqjqp.fT (no spaces)
Serial: 8CN2390B09
SKU: 73V35PA#AB2
Build ID: 22WWI4AZ602#SAB2#DAB2
Board CT: PMQBR0AWBH567B
Name: HP ProOne 440 G9 All-in-One Desktop PC
Save and use BCU to exit MPM mode or restart laptop/desktop how many times counter shows.
REMOVE CMOS BATTERY BEFORE WRITING BIOS!----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
thank youComment
-
hp pro one 440 g9 where is the bios chip, help. This is the first time I've seen this board.
Comment
-
please FIX REPAIR THIS BIOS
HP ProOne 440 23.8 inch G9 All-in-One Desktop PC RCTO Base Model
Serial: 1N14230CVR
P/N : 7F2T8AVComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
​https://www.badcaps.net/donateComment
-
Hello, i need help with the bios for
6050a3342802-mb-a01
HP ProOne 440 23.8 inch G9
SN 8CN24101CS
The current one has no post
Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
​https://www.badcaps.net/donateComment
-
HP ProOne 440 G9 All in one (6050A3342802-MB-A01) - Firmware update in progress
I have a patient with a problem: When turning on, the HP logo displays with the message: Firmware update in progress, please wait, and hangs at this stage. Most likely, it was either disabled during a BIOS update, or the update was unsuccessful. They update automatically without asking.
The Boggle-MV-HSB 6050A3342802-MB-A01 platform
has three SPIs:
BIOS (25Q256JVEN)
JEN1 (25Q256JVEN)
U3402 (W25Q16BV).
I tried different dumps, found the exact same device and dumped it, cleared the ME, but nothing changes. I tried flashing only the BIOS, and all three (BIOS, JEN1, U3402).
When turning on, "Firmware update in progress, please wait" appears again.
Has anyone solved this problem?!Comment
-
Comment
-
Need Clean BIOS/EC Bin File for Lenovo ThinkPad Yoga 11e - Stuck with 0275 Error CMS
Hello everyone,
I am attempting a repair on a Lenovo ThinkPad Yoga 11e that is currently stuck at boot with the error: "0275 error CMS" even after setup new bios battery and will not allow me to enter the BIOS/Setup.
This is a critical issue that I believe requires flashing the BIOS chip directly using a programmer (e.g., CH341A/RT809H), as standard software updates or resets are not possible.
I have opened the laptop and identified the main BIOS chip... -
Hi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70... -
Hello Everyone,
I have HUAWEI MateBook X Pro 2019 (MACH-WX9) whose BIOS got corrupted i beleive. I have acquired Ch341A SPI flasher to program the BIOS externally. I see that to program the BIOS, i need BIOS bin/hex file which i could use to reflash it externally via the flasher tool.
It seems like the support page of this model no longer exist: https://consumer.huawei.com/be/lapto...ro-2019/specs/
In the website, you can only see specs etc.
I have not tried to extract the BIOS dump yet as I want to see if there is any ray of sunshine... -
Hi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R... -
Hello everybody!
To put you in context I recently replaced the battery from my HP Pavilion 15 bc400ns with a used one, everything was going good. The same day, I decided to update the BIOS, everything went good. The thing occurred after I let the battery drain iddling on Windows 11 for the second time to calibrate it that the screen did not turn on again, the computer was on but the screen did not turn, like it would not wake from hibernation. I decided to restart the computer but got no video.
The thing is that I had installed TeamViewer and could log into the computer...
Comment