I got the gpu RX5500Xt 8GB from my brother to fix it, it always crashes when the drivers load. I've now done a memory test with Tserver, but I'm too stupid to understand it properly if anyone thanks
Attached Files
-
-
Re: Interpret Rx5500xt Faulty Ramtest Tserver
it is just badly formated.
try less viever
less report.txt
u have bad chip on positio B1 -
Re: Interpret Rx5500xt Faulty Ramtest Tserver
thanksComment
-
Re: Interpret Rx5500xt Faulty Ramtest Tserver
breid, can you tell me that version of tserver is this please? i have too a rx5500 that no show video
Comment
-
Re: Interpret Rx5500xt Faulty Ramtest Tserver
sry for my late anwser you can download it here! https://drive.google.com/file/d/1nRI...ifHrZQvU8/viewComment
-
Re: Interpret Rx5500xt Faulty Ramtest Tserver
Would it be possible to resend the link?Comment
-
Hi everyone,
I have a Brother MFC-J480DW printer stuck in maintenance mode (BHL2 USB Maintenance). The screen only shows white bars, and it’s completely unresponsive. The official Firmware Update Tool doesn’t detect it, and I’ve tried multiple versions.
I’m looking for the raw firmware file LZ5313_L.blf (or .djf), compatible with FILEDG32.exe, so I can attempt a manual recovery.
If anyone has a full dump of this model (or a compatible one like MFC-J485DW or J885DW), or knows a private Discord or Telegram group where this kind of firmware is shared,...07-05-2025, 10:53 AM -
Hello everyone,
About me, my goal and the equipment I (don't) have:
I am brand new to this forum, and I am eager to learn about repairing laptops. I have an engineer background although I haven't done electronics for a while. I have watched several Youtube videos in the last two months, trying to understand how to diagnose a faulty motherboard. I have a USB-C Amp meter and a classic multi meter. No DC Power Supply to inject voltage, no soldering iron to replace components.
About my issue and my goal:
A friend of mine has a MacBook Air M1 A2337 that does not... -
hello, I have this Brother J2730-DW printer that was brought to me by a friend, it was supposed to be converted to continues ink but the printer wouldn't turn on completely. The printer powers on and plays a tune but it gets stuck in the brother logo. Upon checking, the printer was infested by many small cockroaches. I do checked the board cleaned and tested some corroded capacitors but all seems to be fine, I couldn't find any short circuit or any missing component on the board. Also checked the power supply and it was working fine.
please help. -
Hello esteemed members. I appreciate that my question will strike some as being somewhat childishly simple, but it genuine perplexes me! I have repaired several laptops before by removing a faulty capacitor that was short-circuiting the motherboard, whereupon the laptop would then work. For me, it begs the question that, if the current can bypass where the capcitor was when it has been removed, why didn't it just bypass it when it was present and faulty,? I can't get my head round the premise that if the other side of the capacitor is connected to ground, then why doesn't the current simply bypass... -
Looking for BROTHER MFC-J5340DW BIOS and memory.
What programmer do I need to read these Brother chip, RT809H?
12-27-2024, 08:21 AM
Comment