Brother J2730-DW stuck on Brother Logo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Raymond red (mon)
    New Member
    • Oct 2024
    • 2
    • Philippines
    #1

    Brother J2730-DW stuck on Brother Logo

    hello, I have this Brother J2730-DW printer that was brought to me by a friend, it was supposed to be converted to continues ink but the printer wouldn't turn on completely. The printer powers on and plays a tune but it gets stuck in the brother logo. Upon checking, the printer was infested by many small cockroaches. I do checked the board cleaned and tested some corroded capacitors but all seems to be fine, I couldn't find any short circuit or any missing component on the board. Also checked the power supply and it was working fine.
    please help.
    Tags: None
    • aboumohamed
      Badcaps Veteran
      • Dec 2018
      • 259
      • algeria
      #2
      update firmware

        Comment

        Previous template Next

        Related Topics

        Collapse
        • bseinfo
          Brother MFC-J480DW printer stuck in maintenance mode
          by bseinfo
          Hi everyone,

          I have a Brother MFC-J480DW printer stuck in maintenance mode (BHL2 USB Maintenance). The screen only shows white bars, and it’s completely unresponsive. The official Firmware Update Tool doesn’t detect it, and I’ve tried multiple versions.

          I’m looking for the raw firmware file LZ5313_L.blf (or .djf), compatible with FILEDG32.exe, so I can attempt a manual recovery.

          If anyone has a full dump of this model (or a compatible one like MFC-J485DW or J885DW), or knows a private Discord or Telegram group where this kind of firmware is shared,...
          07-05-2025, 10:53 AM
        • conghuyms
          MacBook Air A2179 stuck logo , pls help me !
          by conghuyms
          Hey everyone,

          I’ve got a MacBook Air A2179 that got some water damage through the keyboard. Now it powers on, shows the Apple logo, but just stays stuck there — no startup chime, no keyboard backlight, and no progress bar under the Apple logo.

          When I try to boot into Internet Recovery (Option + Command + R), the mouse cursor is extremely slow and laggy — like when I lift my finger off the trackpad, the cursor keeps drifting slowly for a second or two.

          I opened it up and found some corrosion around the LED driver IC area on the logic board. I cleaned...
          11-05-2025, 08:30 AM
        • Curious808
          Brother HL-2140 laser printer: printer error (solved)
          by Curious808
          SOLVED. I removed the printer in settings, replugged and let it reinstall and it worked this time.

          Brother HL-2140 laser printer
          Windows 10

          Attempt to print and immediately get a Windows pop-up saying "Error printing". The document appears in the printer queue window with Status "Error-printing".

          Turned off printer. Unplugged, waited, replugged. Ran the Windows troubleshooter. Removed and reinserted toner cartridge. Checked for paper jam. No printer error lights. Reinstalled driver. Restarted the Spooler service. Rebooted...
          06-22-2023, 11:11 PM
        • x_orange90_x
          Vizio V555-G1 stuck on wallpaper; now stuck on V logo
          by x_orange90_x
          I just got this tv today and it's getting stuck on the wallpaper. When I first power it on it goes to the V logo, then a black screen for about 15 seconds, then a Chromecast error for just a few seconds, and then finally to a wallpaper. It stays frozen on this wallpaper and does not respond to anything on the remote besides power on/off. Likewise the buttons on the tv do nothing either (besides power). I did the "reset" by holding the volume down and input buttons together for 10 seconds. It showed a message at the top of the screen saying it was Wiping Data and would restart soon. After...
          12-28-2023, 06:26 AM
        • G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo
          by G33RT
          Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

          It does power up when pressing the power button.

          I already try the power button while plugin the plug with no result.
          Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

          Could this be an PSU or eMMC issue ?
          07-19-2025, 03:43 AM
        • Loading...
        • No more items.
        Working...