Got two of these baords yesterday. They have managed to put two Lelon caps on these boards (both bad on both boards) besides high-quality (I guess...) Rubycon YXG-s (who produced the smaller blue 1000 uF caps seen on the third photo?).



Aopen AX37 Pro
Collapse
X
-
the blue caps look like united chemi-con but there is no series TMY found at united chemi-con. an internet search revealed no data on TMY therefore they may be crap and are imitating the look of united chemi-con.
I have seen this on an Albatron PX-865PE board where amongst the 1000uf 6.3 United Chemi-con KZG which are little brown caps, they put also a few EVERCON 1000uf 10V caps which are the same colour and with the same vents as the United Chemi-con caps. Only the writing on the caps is different.
It is curious that the TMY imitate exactly what chemicons look like. perhaps i am wrong?
Rubycon YXG is at the bottom of the series of their caps relevant for motherboard applications, used because they are the cheapest i guess. An OK but not excellent choice for low ESR, the ZL series would be a better choice. At least they will not fail. -
or maybe it is a discontinued product? i am also trying to find the data of (look alike) chemicon LXF, chemicon "sam young" (<- is it really chemicon?), panasonic FJ (<- the top and the bottom seal are exactly like panasonic), and samsung ssl...days are so short when you actually do something..Comment
-
its amazing how good those company hiding the data sheet of their product... for example, i can't find the datasheet of the good old HFQ panasonic anywhere, even on their website... but finally found some link on a europe site about the comparison of FC and HFQ. maybe panasonic already kill the link for HFQ or other discontinued product.days are so short when you actually do something..Comment
-
chemi-con discontinued series
http://www.chemi-con.co.jp/english/c.../daigae_e.html
they should just point to google instead of having an index.htm in their site. so much hidden information.
LXF replaced by LXY
Samyoung Electronics http://www.samyoung.co.kr/
Since May 03, Samsung no longer make electrolytic capacitors. Their division taken over by Samwha Electric http://www.samwha.com
no need to worry too much about HFQ for our applications, it is probably quite similar to FC.Last edited by willawake; 05-18-2005, 07:55 AM.Comment
-
Re: Aopen AX37 Pro
good work Sulbert. this weekend we are having many happy stories.Comment
Related Topics
Collapse
-
by kahlil88Just got a computer with this board and ALL of the Lelon RXA caps have failed. Having trouble finding datasheets to match against potential replacements. The caps in question are 7x 1500uf 6.3V 10x20 and 11x 1000uf 6.3V 8x12. Open to replacing with polymers as long as it works.10-23-2025, 03:14 PM
-
by momakaI know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.
For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).
https://www.badcaps.net/filedata/fetch?id=3591771
https://www.badcaps.net/filedata/fetch?id=3591772
It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:
https://www.badcaps.net/filedata/fetch?id=359177... -
by RUllER
This is not a fake Chemicon, it is genuine
Many companies are outsourcing to Chinese factories....-
Channel: General Capacitor Questions & Issues
-
-
by flibidyI have here a Magnum IA.100 which belongs to my parents.
The unit powers on & when the relay kicks in, you get a pop from the speakers (this might sound weird but is usual behavior for this amp). However, you get nothing coming through it from any of the inputs & no pops and crackls from any of the controls.
Because of the sound from the speaker when the amp turns on I have assumed that the output section probably works but I could be wrong & I'm not sure how to test that side of things further.
What Ive done........8 Photos-
Channel: Troubleshooting Audio Equipment
01-01-2025, 01:26 PM -
-
by Justin_D33Hello all. This is my Delta DPS-250AB PSU. It does not work anymore, and I'm assuming the cause is dried-out secondary capacitors. Specifically, those dreaded CapXons. I have some recap stock I salvaged from a dead ECS 945GCT-M3:
1, United Chemicon KZG 560 µF 6.3V, there's one of these
2, Sanyo WG 2200 µF 10V, there's 3 of these that came from the VRM area
3, more Sanyo WGs, these came from the PCIe area. There's 3 in total, they are 6.3V ones. I forgot the exact capacitance, and I don't want to dig them out right now.1 Photo - Loading...
- No more items.
Comment