3.2V on Northbrigde ?

bianchi77

Badcaps Legend

Join Date: Jun 2016

Posts: 1121

Country: Australia
#1

3.2V on Northbrigde ?

09-27-2016, 05:49 PM

Guys,

I got 3.2V on Northbridge, it's Intel JG82865G SL99Y, could be this northbridge is faulty ?
Normally I got 1.8V for it ...and when I checked with my thermocouple it reached nearly 100 degree with heatsink...

Any experiences ?
Tags: None
kc8adu

Super Moderator

Join Date: Nov 2003

Posts: 8832

Country: U.S.A!
#2

10-08-2016, 09:53 AM

Re: 3.2V on Northbrigde ?

its possible it survived.but you need to fix the regulator issue asap.
dont power it up till you do.
Comment
bianchi77

Badcaps Legend

Join Date: Jun 2016

Posts: 1121

Country: Australia
#3

10-08-2016, 05:47 PM

Re: 3.2V on Northbrigde ?

Originally posted by kc8adu

its possible it survived.but you need to fix the regulator issue asap.
dont power it up till you do.

I reckon it's faulty, I got no VGA output anymore from it....
Comment

Previous template Next

PHILIPS 42PFL7008k/12 HARDWARE UPGRADE(REQUIRED HARDWARE/EXPERIENCES)!!

by rakonja

Hello everyone! I am the owner of a Philips 42PFL7008k/12 TV! It served me well all the years. Sometimes it used to get "stuck", after which I used to disconnect it from the voltage, hold the power button on the device for about 30 seconds, and after turning it on again, it worked like new!Only once it threw something like no software!Now it happened that it won't turn on anymore, the red LED blinks twice!Do you have any suggestions? They are probably not cost effective to repair, but I am sorry to get rid of it, it has served me well and looks like new!The only downside is the slow...
- Channel: Troubleshooting TVs and Video Sources
09-07-2023, 09:50 AM
Bad Experiences with repairs

by dcapper

So who's had bad experiences with tv repairs? I was given a nice LG 50" Smart TV with burnt out led's and I replaced them all. Put it back together and thought I had the screen in the right position. Clicked the case on and crack. Ugh. Garbage now.
- Channel: Troubleshooting TVs and Video Sources
03-15-2020, 06:00 PM
Fix Thermocouple

by capwizard

I have 3 thermocouples which I bought from Aliexpress has 2 meters long, very inconvenience to use. my question is thermocouple is two metal welded together. can I cut it then weld to make multi thermocouple?

I cut open the one is not working, the wires are separated can I weld it and fix it?...
- Channel: General Electronics Technical Discussion
03-13-2019, 11:17 AM
lc-90le657u - any experiences?

by itelite

I am working on a Sharp lc-90le657u at a customer's home.

It would occasionally click the relay, turn on the backlight for a fraction of a second, turn off, click relay off. More often than not it will do nothing at all.

On the first trip i replace the power supply, on the second i replaced the main board. Today i spent about an hour testing various things.

Tested all LED + - wires. all exactly 196v with backlight tester, and could see each strip light up. With ameter in series the current was identical on every strip.

Primary side voltages...
- Channel: Troubleshooting TVs and Video Sources
05-06-2021, 08:07 PM
Cooling experts wanted.... (with pictures)

by SluggerB

So if you have been following my urine odor saga with my new PC, I believe I finally found out what is happening, my Northbridge heatsink is getting quite toasty, and other people online with my motherboard say the VRM's get hot as well. That may be the source of the odor I am smelling.

Current setup
The case has 3 fan openings, a 120mm front, a 120mm side, and a 92mm rear. Currently the only fan installed is the 120mm front. The CPU cooler has a side mounted 92mm fan on it (and that cooler is very cool, CPU temps are great). The only exhaust is from the PSU
...
- Channel: General Computer & Tech Discussion
04-12-2022, 07:28 AM
Loading...
No more items.

3.2V on Northbrigde ?

3.2V on Northbrigde ?

Comment

Comment

Related Topics