Gigabyte GA-F2A88X-D3H Motherboard came with ram beep when checked it i didnt find 3.3 volt vddspd because of damaged resistor i replaced it and the motherboard startup normaly with no error code and all volts are ok but on the tister it stop on code 63 after posting and the cpu volt becomes 0 volt
-
Can anyone clean the bios of the gigabyte RC55 notebook S/N:SN23091J000287. NP50RNCY0-D01-B motherboard.
The notebook is stuck on the logo.
I would appreciate it if someone helps me.... -
Can anyone post a complete bios dump for a Gigabyte GA-MA74GM-S2 Rev 1.0 desktop motherboard please?
I have a dead motherboard - with no obvious signs of damage which I would like to save from scrap
Many thanks for any help -
This job which came in is a Gigabyte B650M D3HP AX (rev. 1.0). It has BIOS version F1 currently, and the CPU installed is Ryzen 9 9900X, which according to the Gigaybte site, needs at least BIOS version F30. I don't have a supported CPU to install for the purpose of updating the BIOS. I have downloaded the BIOS from Gigabyte's website and unzipped the file "B650MD3HPAX.F32a". Can I just rename it to 'B650MD3HPAX.BIN' and flash it to the motherboard using neoprogrammer and my CH341A?...
-
Gigabyte G1 Assasain motherboard Bios IC model needed !
Bios ic fried and I cant read the model on top.
Thanks ! -
Hi, last month i bought a broken pc that i tought i can fix for myself but it turned out to be time consuming. The pc turn on and shows no display and beeps 5 times and restarts again and again, i think it s the motherboard because i tested/replaced all the parts except the motherboard. The pc was used mostly for light gaming and i think it wasnt overclocked or something. I tried all the basic fixes(cleaning the ram slots, removing the cmos battery, reseat the GPU/CPU/RAM). I think the last thing to do is to replace or repair the mobo but i prefer to try to repair because i don t want to spent...