Gigabyte motherboard GA-H110M-S2PH (rev. 1.0) DDR3 | Boot loop and 5 beeps

[vallllliiii]

Hi, last month i bought a broken pc that i tought i can fix for myself but it turned out to be time consuming. The pc turn on and shows no display and beeps 5 times and restarts again and again, i think it s the motherboard because i tested/replaced all the parts except the motherboard. The pc was used mostly for light gaming and i think it wasnt overclocked or something. I tried all the basic fixes(cleaning the ram slots, removing the cmos battery, reseat the GPU/CPU/RAM). I think the last thing to do is to replace or repair the mobo but i prefer to try to repair because i don t want to spent more money and in my area isnt any service repair shop. If you have any idea please Help!

PC specs:

Processor: i5 6500(had some tiny pieces on the back that was missing so i replaced with a i5 6600k)
GPU: GTX 1060 3GB (the gpu works perfectly fine, tested in my main Build)
RAM: DDR3 2x4gb (of mixed memory sticks, both from kingston) Replaced with brand new sticks 2x8gb 1600mhz
Mobo: Gigabyte GA-H110M-S2PH DDR3 (rev. 1.0) (t
PSU: High Power 650w (Works perfectly fine the voltages are good)

[anikin73]

For gigabyte mono, my first guess is , swap with the spare bios first… since got beep means the code got run…

[Aliencomputres]

The 5 short beep code is related to the system not finding a CPU.
This could be PSU failure in the fact that the CPU power is no longer operating.