ATI X1950 pro AGP. Is it repairable?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gilly1984
    Badcaps Veteran
    • Jun 2012
    • 751
    • UK
    #1

    ATI X1950 pro AGP. Is it repairable?

    Just bought this card from ebay as untested/faulty.

    Been trying for hours to get it to come on but no joy, so I take a closer look and notice a 14 pin ic chip missing and 2 smd caps.

    The pads are also missing from where the ic sat.

    Does anyone know what the missing ic is? I am hoping it is just for the digital out as I only use analogue out.

    I know it will be a pain to replace but I am willing to give it a try if I can locate one. I have an old radeon 9200 with a 14 pin ic on it but just dont know if it will be the same.

    Here are some pics,,,
    Attached Files
    Do NOT touch heatsinks when testing for voltages as they may be LIVE!
    Tags: None
    • gilly1984
      Badcaps Veteran
      • Jun 2012
      • 751
      • UK
      #2
      Re: ATI X1950 pro AGP. Is it repairable?

      Surely somebody has this card on here, just need to know what that missing 14 pin ic is.

      Think it controls 2 mosfets but not sure, just need a datasheet/model number for it.
      Do NOT touch heatsinks when testing for voltages as they may be LIVE!

        Comment

        Previous template Next

        Related Topics

        Collapse
        • ugamazing
          820-02020 PPBUS_AON missing
          by ugamazing
          Board had no history of liquid; unsure of drop history, but no signs of damage of any kind worth noting.

          Charger sitting at 5v/0a. PPBUS is at 1.9v-0.9v steady cycle (peaks, drains, loops). Confirmed CHGR_EN_MVR is missing, but DCIN was reaching ISL just fine, so replaced ISL--no change at all. Confirmed pp3v8_aon is also missing--and being unsure *exactly* which signal appears first (or if they are simultaneous), I inspected PMU/U8100 area and found no shorts, but also found PP3V8_AON_MPMU_ISNS_VIN missing (not shorted). Replaced U8100 just in case (have had them fail in weird ways),...
          02-05-2025, 04:21 PM
        • jpreza
          Apple NVIDIA AGP GeForce 6800 GT Dual Link DVI+DVI outputs 603-6338 missing caps!
          by jpreza
          Hi everyone,

          I recently acquired this card from a seller who was selling a PowerMac G5 for parts. He mentioned that the video card was probably broken too.

          Upon closer inspection, I can tell the reason why it won't work: it's missing a bunch of CAPS! (it's also missing an inductor - 1.0uH).

          It's a nice card as it's one of the few AGP cards that will support 2560 x 1600 resolution on a PowerMac G5 using a 30" Cinema Display.

          Looking at the card, it appears to be missing the following:

          1x 1.0uH inductor - orange square
          2x...
          1 Photo
          11-01-2024, 10:54 PM
        • gurj1979
          Asus Zenbook UX431DA / UM431D - Ryzen - missing PWM Fan Signal.
          by gurj1979
          Hey guys.

          Need help with this one.
          Fan not spinning due to missing PWN Fan signal.
          Also 5 seconds from powering up it freezes, unless in BIOS.
          But as soon as Windows starts to load, it will freeze.
          CPU is COLD / Room temp when it freezes.

          I've replaced the CPU, same problem.
          Replaced SIO/KBC IT8987e and reprogrammed - same problem.
          Replaced fan - same problem.
          Replaced flex cable from board to daughterboard (which has fan connector on it) - same problem.
          Checked the Thermal sensors around CPU and Board to the SIO/KBC and...
          08-19-2024, 05:22 PM
        • salopian
          Macbook Pro Retina 13” 820-3476-A (A1502) - missing PM_SLP_S4_L
          by salopian
          Hello. I would need some advice please.

          My son's MBP suddenly stopped working and is now only getting the green-then-orange light on Magsafe and no fan spin.
          He brought the MBP into the house (22 deg C) from a very cold conservatory (-3 deg C) and turned it on straight away. The Mac suddenly died a few minutes later.

          I examined the logic board and couldn't find any signs of water damage, corrosion, blown up components etc. Nothing was ever spilt on it, and the logic board looks immaculate.

          I have already replaced the logic board with another...
          02-27-2021, 07:30 AM
        • reessi
          HP - CE Series - DAG7ALMB8C0 REV.C - MODEL - G7AL-2G - Missing MAINON & SUSON - Turns on power LED & Charges
          by reessi
          Hello,

          I have re-soldered the loose pins on the RAM slot which is a common fault on these models..

          It charges and turns on the power LED but is missing several voltages like RAM and CPU do not come up which I believe is due to MAINON & SUSON being missing to turn these supplies on..

          What I am un-sure of is what is the ITC chip waiting for to send out these signals, what are the requirements?
          I have checked these lines in diode mode and they seam normal -> 600.

          I have checked to see if they come on for even a fraction of a second...
          07-15-2025, 09:14 AM
        • Loading...
        • No more items.
        Working...