BF6 Mosfets

[Smiffy]

Re: BF6 Mosfets

Hi All
My Tualatin 1.3Ghz is on the BF6 with 1.50v at 1690Mhz.The mosfets now hot again as is the vcore controller chip(RC5058M)Although the Tualatin processor is quite cool easily cooled by a 1U coppper cooler.So the plan is to replace the remaining caps with 1500uf although I may try 2200uf as I already have some.Then see if the FDB7030Ls work.Then if so heatsink them and the controller chip and glue a fan to the back of the Friendtech FTK-Slot/Z to cool the whole lot.Its an old board accepted but a Tualatin running at 1.7Ghz is still a pretty good folding rig.
Smiffy

[Chris1992]

Re: BF6 Mosfets

>is still a pretty good folding rig.
Also, it's still a great daily driver. Probably outperforms a P4 celeron 1.7GHz at 2040MHz.

[Smiffy]

Re: BF6 Mosfets

Hi All
What about this fella.Not 100A but input capacitance roughly same as original

https://cdn.badcaps-static.com/pdfs/...899b875b5e.pdf

Ta

Smiffy

[davmax]

Re: BF6 Mosfets

The Philips FET looks good. If your planning to buy. Make sure you get the correct packaging eg Dpak.

[Smiffy]

Re: BF6 Mosfets

Hi All
Will do Davemax.Thanks for all the help

Chris1992
I sandrad it at 123Mhz fsb with cpu at 1605Mhz.Compared to my work mates P4 1.6Ghz on PC133 its better

P4 1.6Ghz
CPU 3971/2142
MM 9636/12395
MEM 726/725

TUAL 1.6Ghz
CPU 5578/2198
MM 14038/16916
MEM 848/890

Smiffy