Help! Can anyone help identify this cap on HD5850?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • bobmoo79
    New Member
    • Mar 2011
    • 2
    #1

    Help! Can anyone help identify this cap on HD5850?

    My Saphire HD5850 (reference PCB) has a missing capacitor (C541) and I need to replace it, but I don't know which component I need to buy.




    I have attached a photo I found online which shows the capacitor that needs to be replaced. Hopefully you'll be able to see clear enough.


    Can anyone offer any advice to help me get the right part?

    Many thanks,

    Bob

    Attached Files
    Tags: None
    • steve2
      Senior Member
      • Dec 2010
      • 121
      #2
      Re: Help! Can anyone help identify this cap on HD5850?

      I would say it is the same as the 2 next to it.C529 and C520. Would have to take it off to get an accurate uf measurement. I don't know the voltage ratings of most smd parts by looking at them, but someone may. I guess you can see that this piece was physically there before by looking at the solder pads. Pads not smooth anymore.
      Last edited by steve2; 03-07-2011, 09:40 AM.

        Comment

        • steve2
          Senior Member
          • Dec 2010
          • 121
          #3
          Re: Help! Can anyone help identify this cap on HD5850?

          Wel, after googling a few minutes, I see where the capacitor above yours is missing. You might try to contact their support to see if they can tell you.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • thesame
              DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components
              by thesame
              Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
              The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

              ​...
              02-27-2024, 04:31 AM
            • silver60618
              Lenovo Legion 7 - Help Identify IC
              by silver60618
              Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC

              I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?

              Any help would be appreciated...
              07-02-2025, 12:16 PM
            • chth96
              How can I identify varistor which have been blew up?
              by chth96
              I mistakely pluged 100v japanese retro game console to 220v outlet.
              So It seems that glass fuse and varistor have been blew up.
              I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
              Is there any way to identify varistor type in my sega saturn PSU?
              Any reply would be appreciated.


              EDIT:
              It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage...
              2 Photos
              11-26-2023, 08:52 AM
            • freakorio
              Need Help To Identify Component on Ymain LJ41-05120A
              by freakorio
              Hi guys , i hope this is the right place , i got Plasma Samsung PS-50Q91H and i need to repair Ymain LJ41-05120A , but those component are burn and i can not identify to replace those part , and the part are blue capacitor and the location are C5105 and C5106 and here i attach the part that need to identify , and one more thing , i also need to replace Zener Diode on location ZD5502 and the part are BZV55C because mine is short but i don't know the voltage because those parts are release with many type of voltage. Looking forward for your kindly reply
              1 Photo
              05-21-2024, 02:32 AM
            • baiceanu_stefan
              nm-f251 Schematic, boardview or help identify componente
              by baiceanu_stefan
              Hello, I have a legion pro 5 16arx8 serial number pf4bf4aw mb code nm-f251 rev1.0 which was dissasembled by the client for cleaning. Now it does start but for 20 secs after that fans run at maximum and then shut down. Found PU8302 burned but cannot identify it the part. It is written eHFAA on it but didn't found any info, no boardview, nothing. Can anyone help identify the part so I can order it from somwhere? Ataching some pictures of the motherboard, serial number and part. Than\k you...
              04-24-2024, 12:49 AM
            • Loading...
            • No more items.
            Working...