Re: Asus P4C800-E Deluxe rejuvenation
1000uf, 6.3v, 8 mm diameter, 12 mm height
As you can see in the pic, the Ltec are slightly smaller than the Sanyo
Underneath, the Ltec show what I regard as the "poor quality" bung with concentric circles like a target, whereas the Sanyo have the "good quality" bung with a moulded shape
I saw your recipe while I was trawling through originally, seeking inspiratation to fix it in the first place
I'm very much an amateur, takes me a ridiculous amount of time to do a recap, which was most of the incentive to find what I'd done wrong
Although, seeing those replacement FJs are now done with normal solder, ....
Originally posted by PCBONEZ
View Post
As you can see in the pic, the Ltec are slightly smaller than the Sanyo
Underneath, the Ltec show what I regard as the "poor quality" bung with concentric circles like a target, whereas the Sanyo have the "good quality" bung with a moulded shape
Originally posted by kc8adu
View Post
I'm very much an amateur, takes me a ridiculous amount of time to do a recap, which was most of the incentive to find what I'd done wrong
Although, seeing those replacement FJs are now done with normal solder, ....
Comment