3 years ago I built my own PC and I decided on going with an XFX Geforce 8600GT.
Yesterday morning I heard a popping sound while I was on my pc and a few hours later i started getting video problems. I knew right away it was my video card.
It has a few blown caps, but otherwise is in great condition. Unfortunately it was out of warranty so I couldn't get it replaced.
My only option is to buy a new card, which i found a 8400 GS for $30, which is literally all the money i had. Lucky me. I'm not happy cause specs are a little bit less than i had but I have no choice and need a new card right now. (I'm stuck on a really slow back-up machine right now until i get the new card)
Anyway, i figured that given my situation i could try to replace those blown caps. I have nothing to lose
and it would be fun to give it a shot, and thats what brought me here.
I want to get a much better card later on but right now $100+ is not feasible.
While searching online for some answer about caps I seen alot of posts with people talking about the same problem with the same series of cards, 8600gt.
Seems like the series is plagued with bad caps all around then.
Anyway I need to replace a total of 5 caps.
All caps are Silver. On the top, next to the info, the LEFT side has a blue strip.
2 caps say
FZ76
470
16V
The other 3 say
FZ77
1500
6.3V
As I said i would like to take a shot at replacing them (as long as replacement caps aren't too expensive), but I know pretty much nothing about caps so this is why i need some help.
Any help would be appreciated
Also i'm confident in my soldering skills to attempt this lol.
Yesterday morning I heard a popping sound while I was on my pc and a few hours later i started getting video problems. I knew right away it was my video card.
It has a few blown caps, but otherwise is in great condition. Unfortunately it was out of warranty so I couldn't get it replaced.
My only option is to buy a new card, which i found a 8400 GS for $30, which is literally all the money i had. Lucky me. I'm not happy cause specs are a little bit less than i had but I have no choice and need a new card right now. (I'm stuck on a really slow back-up machine right now until i get the new card)
Anyway, i figured that given my situation i could try to replace those blown caps. I have nothing to lose

I want to get a much better card later on but right now $100+ is not feasible.
While searching online for some answer about caps I seen alot of posts with people talking about the same problem with the same series of cards, 8600gt.
Seems like the series is plagued with bad caps all around then.
Anyway I need to replace a total of 5 caps.
All caps are Silver. On the top, next to the info, the LEFT side has a blue strip.
2 caps say
FZ76
470
16V
The other 3 say
FZ77
1500
6.3V
As I said i would like to take a shot at replacing them (as long as replacement caps aren't too expensive), but I know pretty much nothing about caps so this is why i need some help.
Any help would be appreciated

Also i'm confident in my soldering skills to attempt this lol.
Comment