-
-
Re: Sceptre x22wg-Gamer 22" LCD
Without a picture it's hard to make an informed evaluation, but it certainly sounds like a bad bond between the LCD panel and the flex conductor from the panel board. IF that is the case, it's unrepairable.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: Sceptre x22wg-Gamer 22" LCD
Not many options, and video conversions are one of the many areas in which I lack skills. I'd suggest posting it on one of the sites that allow hosting videos; preferably one that doesn't inundate the unwary with dozens of pop-ups praising the erotic talents of 40 year old 'teenagers'.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: Sceptre x22wg-Gamer 22" LCD
You are funny, I liked that. Well here it is but it wasn't a bad site:
http://www.zshare.net/video/951840753397964c/Comment
-
Re: Sceptre x22wg-Gamer 22" LCD
Not a particularly good site. McAfee and AdBlocker Plus both issued warnings and blocked a number of popups, including one triggered by playing the video.
HOWEVER, your video showed four things: You will never be a pilot (the bars were horizontal, not vertical, your description was inadequate, my conclusion was incorrect, and you have (probably 60Hz) hum bars. This MIGHT be a grounding problem, but it is far more likely that the mains filter cap in the monitor's power supply is bad. It doesn't happen often, but it has been known to occur.
PlainBillLast edited by PlainBill; 10-26-2011, 08:07 AM.For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.Comment
-
Re: Sceptre x22wg-Gamer 22" LCD
I tried wiggling the LDVS cable to no avail. Is my panel just done for?Attached Files3 repairs under my belt, 3 repairs in progressComment
-
-
This specification for the Huawei MateBook MATEBOOK 16 SPACE GRAY Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the MATEBOOK 16 SPACE GRAY boardview and MATEBOOK 16 SPACE GRAY schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification,...09-07-2024, 05:20 AM
-
This specification for the Samsung 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U Chromebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U boardview and 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help...09-07-2024, 12:10 AM
-
I have a older eddy current tester made by Olympus that uses interchangeable TFT-LCD screens. I have two devices that each take the same removable screens. One is an Olympus NORTEC 200D+ and the other is an Olympus SONIC 1200M EMI. I have searched the internet high and low for service manuals for these units with no luck. Both these units were used extensively by the US military for NDT on airplanes. The detachable screen plugs into the base unit via a weird non standard VGA connector. Buttons on the removable display are used to power the units on. When the power button is pressed the unit makes...03-01-2024, 05:05 PM
-
For today's thread, I have a KingWin ABT-650MM ATX PSU. Official web page with the PSU specs is still up and can be found here:
http://www.rmac.kingwin.com/products.../abt_650MM.asp
I just can't help it when I see a broken / for parts PSU on eBay that's listed for cheap and looks at least somewhat interesting. Well, OK, I won't lie – on the outside, this PSU looks anything but interesting. It's a plain gray box with colorful “spaghetti cables”.
What mostly drew me into buying it is its 2x PCI-E power connectors... -
Trying to fix a backlight problem with a Sceptre 48" TV.
I found replacement strips with the same part number as the strips in the Sceptre, but the new backlight strips have 5 leds per strip and the ones in the tv has 6.
So I decided to replace the leds instead. I found 3 bad ones. I had no problem removing the bad ones with a heat gun, they came right out. However the leds on the replacement strip would not come out with heat. I use my solder iron as well, they will not come off.
Anyone know how I can remove those leds without damaging them?
Comment