Hello,
I have a strange problem with LG W2442PA LCD monitor - it is working fine, but if you leave the PC to switch off the monitor into power saving mode and you leave it like that for some 3-4 minutes (enough for the monitor to cool down), and then you wake it up - the monitor will flicker (just like 60Hz on CRT) for 15-20 sec. and then will return back to normal operation. The same can be reproduced if you simply turn off the display by using the on/off switch on the monitor for some 3-4 minutes after it heated up.
It would never flicker when being used intensively (i.e. if you not let it enter in power saving mode to cool down or turn it off manually for some time and).
Please advise!
Thanks in advance for your time spent!
I have a strange problem with LG W2442PA LCD monitor - it is working fine, but if you leave the PC to switch off the monitor into power saving mode and you leave it like that for some 3-4 minutes (enough for the monitor to cool down), and then you wake it up - the monitor will flicker (just like 60Hz on CRT) for 15-20 sec. and then will return back to normal operation. The same can be reproduced if you simply turn off the display by using the on/off switch on the monitor for some 3-4 minutes after it heated up.
It would never flicker when being used intensively (i.e. if you not let it enter in power saving mode to cool down or turn it off manually for some time and).
Please advise!

Thanks in advance for your time spent!
Comment