Inverter CCFL connector question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mu2
    Badcaps Veteran
    • Oct 2009
    • 217
    #1

    Inverter CCFL connector question

    Hi,

    Just bought a case mod kit to test CCFL's in lcd computer displays.
    I'd like to buy the connector / cable assembly that is wired to the ccfl's in lcd monitors. I want to change the connector on the lamps that came with the kit to match the inverter pcb connectors I see on the monitors.
    Is there a "standard" connector? Molex perhaps?
    I've seen cable assemblies on some websites but plan orders to Digikey and Mouser soon and would like to include them on the order.
    Anyone have Mouser or Digikey part numbers?
    I don't have a scrap monitor to scavenge the connectors.

    Thanks,

    Mike
    Tags: None
    • kingofcoins
      SaveOnGreen-Cap
      • Jan 2010
      • 162
      #2
      Re: Inverter and CCFL test connectors...

      Take a look at my CCFL lamp and Inverter test kit....pic shows all... the two pairs of white leads are what you're after...left pair has a pair of cap legs soldered into stranded wire for a single fine test lead (waste not want not), and the right pair of leads are soldered flat so they stick in the board connector. The 12V battery pack is lghting my 'spare' lamp, and I've left the female dongle on for an alternate connection to power.
      Questions...?
      Attached Files

        Comment

        • ecking767
          Badcaps Veteran
          • Oct 2009
          • 492
          • USA
          #3
          Re: Inverter CCFL connector question

          here a website that I found that have the connector you want

          http://www.futureelectronics.com/en/...9%28SN%29.aspx

          Hope this help
          ecking767

            Comment

            • mu2
              Badcaps Veteran
              • Oct 2009
              • 217
              #4
              Re: Inverter CCFL connector question

              Many thanks for the part number!
              That is what I wanted.

              Mike

                Comment

                Previous template Next

                Related Topics

                Collapse
                • ttmi100x
                  HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
                  by ttmi100x
                  Greetings everyone,


                  I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


                  The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
                  Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

                  Upon closer inspection...
                  "Burnt" resistor
                  6 Photos
                  07-31-2024, 06:36 PM
                • caseyjay_48
                  Sony KDL-46BX450 Inverter Troubleshoot Logic
                  by caseyjay_48
                  I am currently on a troubleshoot of 46” Sony KDL-46BX450 tv. I came back from Washington to Texas on medical emergency and had to leave all my tools up there. All I have is a couple of screwdrivers and a dvm. I wish to ask the community a troubleshooting question. Please forgive stupid questions as meds I am taking produce brain fog.
                  I have well maintained Sony KDL-46BX450. It went black one day. After turn-on, I get solid green light and Sony logo in screen center for about 1-2 seconds, then black. No blinking LEDs, no hissing. Flashlight test shows screen characters dimly viewable,...
                  09-23-2022, 08:08 PM
                • 5mall5nail5
                  Help identifying connector for ASUS 4090 Strix RGB LED connector
                  by 5mall5nail5
                  Hi All -

                  I had replaced my ASUS 4090 Strix cooler with a waterblock and put the stock cooler on the shelf. Was moving it and snagged my sweater on the connector and pulled the wires out of the pins on the RGB connector. I tried to get them back on but its too small so I opened the stamped pins and tried to solder but its not a good repair and the wire broke on reinstallation.

                  Looking to replace the connector on the cable side and get pins to crimp onto a new cable. Bought random JST and such but nothing is correct. Can anyone help identify the connector and possibly matching...
                  05-04-2025, 07:47 AM
                • bussincaps
                  MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
                  by bussincaps
                  Hello All,

                  tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

                  Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
                  eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
                  Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

                  I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
                  08-03-2023, 12:57 PM
                • michhak
                  Toshiba Satellite M50-A keyboard connector on LA-A481P motherboard
                  by michhak
                  Hi guys,
                  i have a damaged keyboard connector on my older Toshiba Satellite M50-A laptop. I know there is LA-A481P motherboard. In attachment pictures there is a real looking connector and i also found a schematic to the connector. But i need help with finding a real electronic part to replace the damaged connector. e.g. on aliexpress (or different page).
                  It is 34pin connector and the length from pin n.1 to pin n.34 is 26mm. So it means a pitch length is 0.764 mm. I have seen connectors with 0.5mm , 0.7mm , 0.8mm and 1mm pitch length. But not with 0.75. Is it some special custom connector...
                  11-17-2021, 05:45 AM
                • Loading...
                • No more items.
                Working...