Hyundai U90d no screen flash at all

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dmbj
    Member
    • May 2009
    • 23
    #1

    Hyundai U90d no screen flash at all

    The Green Power light will come on and then go to amber. The screen never flashes on at all. Supposedly this monitor was used for about 3 weeks. and then sat on a shelf for months. IT was made in may 07.

    There is a burned up ic on the bottom of the board and i have no clue how to figure out what it was, or what would have caused it to go bad.

    FYI: the 12v on the inverter is steady at 11.97v and the 5v is steady at 5.05v There is no 3.3v on this board that i can find.

    Any Ideas guys?
    Attached Files
    Last edited by dmbj; 05-16-2009, 01:44 PM.
    Tags: None
    • Bobdee
      Badcaps Veteran
      • Jun 2008
      • 461
      #2
      Re: Hyundai U90d no screen flash at all

      not a very good picture but its probably a mosfet, one of a matching pair the other one is to the right of it, one for each transformer

        Comment

        • EGuevarae
          Badcaps Legend
          • Nov 2008
          • 1336
          • USA
          #3
          Re: Hyundai U90d no screen flash at all

          Originally posted by Bobdee
          not a very good picture but its probably a mosfet, one of a matching pair the other one is to the right of it, one for each transformer
          I agree. The burned up (left) is mirrored on the right. See what part number is that and you will know the part no. for the burned up.
          There are 10 kind of people in this world: those that understand binary, and those who don't.
          • ASUS ROG Maximus IX Code
          • Intel Core i5-7600K 3.8GHz
          • 16gb GSKILL TridentZ RGB DDR4-3200
          • 1 M2 SSD + 2 WD Blue 1TB (Mirrored)
          • Windows 10 Pro x64
          • GeForce GT1050
            2 x Acer KA240H + 1 Vewsonic VP2130 21 (a cap replacement job )

            Comment

            • dmbj
              Member
              • May 2009
              • 23
              #4
              Re: Hyundai U90d no screen flash at all

              I have identified the other one it is this this
              https://cdn.badcaps-static.com/pdfs/...32cac38da5.pdf

              However digikey, mouser, and ebay do not seem to have it. any ideas on where else to find it would be appreciated.

                Comment

                • dmbj
                  Member
                  • May 2009
                  • 23
                  #5
                  Re: Hyundai U90d no screen flash at all

                  also once again i was pointed to this from someone

                  and i can find it but. I dont know if its right.

                    Comment

                    • zielony
                      New Member
                      • Feb 2015
                      • 1
                      • Europa
                      #6
                      Re: Hyundai U90d no screen flash at all

                      I bougth that LCD from second hand few weeks ago.

                      It has different colors by VGA and DVI sources.

                      I would like to open it, but I have problem with removing stand.
                      Uncle góógle didn't help me with disassembly manual :o

                      Anybody can point/instruct me?

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • Ryan.man
                          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                          by Ryan.man
                          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                          02-04-2025, 12:23 PM
                        • reformatt
                          Macbook Air M2 A2681 Kernel panics after screen replacement
                          by reformatt
                          Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                          It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                          07-31-2025, 08:37 PM
                        • smic717394
                          MSI Optix MPG27CQ half screen working. Identify burned component
                          by smic717394
                          Hi,

                          I have a MSI Optix MPG27CQ screen to fix, only half screen is working, I found a burned chip on the right buffer board (S270DP01V00_HF_SR) but I can't read the model. Can anybody help?...
                          2 Photos
                          04-08-2025, 05:53 AM
                        • smic717394
                          iphone XS turns off when press on screen.
                          by smic717394
                          Hi,

                          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                          07-25-2024, 10:16 AM
                        • corrize
                          Nikon D800 camera - flash don’t work and capacitor don’t charge
                          by corrize
                          Hello, I'm stuck in troubleshooting…
                          The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

                          In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
                          When I press the flash button, it's detected by the system, flash icon appear on LDC display....
                          10-01-2022, 10:02 AM
                        • Loading...
                        • No more items.
                        Working...