Need comfort

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Retired
    New Member
    • Feb 2013
    • 2
    • USA

    #1

    Need comfort

    Anyone know what the values are for C65 and R88 on the HOAU462001
    power supply board.
  • smason
    Badcaps Legend
    • Feb 2010
    • 1652
    • Canada

    #2
    Re: Need comfort

    Manufacturer and Model of the monitor please.
    36 Monitors, 3 TVs, 4 Laptops, 1 motherboard, 1 Printer, 1 iMac, 2 hard drive docks and one IP Phone repaired so far....

    Comment

    • selldoor
      Slow Learner
      • Dec 2010
      • 7870

      #3
      Re: Need comfort

      Originally posted by Retired
      Anyone know what the values are for C65 and R88 on the HOAU462001
      power supply board.
      Do you not have the old ones? - No writing on them? no colour bands
      what does the resistor measure?
      A good picture of where they are on the board might help with ID.
      Please upload pictures using attachment function when ask for help on the repair
      http://www.badcaps.net/forum/showthread.php?t=39740

      Comment

      • gilly1984
        Badcaps Veteran
        • Jun 2012
        • 751
        • UK

        #4
        Re: Need comfort

        Sceptre X9G Naga V

        Same post here

        https://www.badcaps.net/forum/showthread.php?t=7523
        Do NOT touch heatsinks when testing for voltages as they may be LIVE!

        Comment

        • selldoor
          Slow Learner
          • Dec 2010
          • 7870

          #5
          Re: Need comfort

          IS THIS THREAD NOW DEAD?
          OP has posted this in another thread
          https://www.badcaps.net/forum/showthread.php?t=7523
          but doesnt actually say if his had the components and they have blown up or if it never had them in the first place!!

          Default Re: Sceptre X9 Naga V Monitors
          It appears as though most of the posts for this board (HOAU462001 power supply for the Sceptre X9G Naga V) indicate C65 and C88 are missing. Here's my thought. Maybe they were part (the traces dont indicate it) of the original circuit design and later omitted (snipped out) by the mfr. Just my opinion. My board has the infamous bulging caps mentioned in other posts. The 5 volt supply is running (high ripple) but the HV supply is dead. A note.
          There is about 165v both sides of the missing R65 with respect to the Q3 heat sink. Nice forum. Thanks to all
          Please upload pictures using attachment function when ask for help on the repair
          http://www.badcaps.net/forum/showthread.php?t=39740

          Comment

          • gilly1984
            Badcaps Veteran
            • Jun 2012
            • 751
            • UK

            #6
            Re: Need comfort

            I think so.

            I googled and came across a site that gave an answer saying these are not on the board in the first place?

            it was the ask me fast site, or fix it. not sure how good them sites are though.
            Do NOT touch heatsinks when testing for voltages as they may be LIVE!

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • Hakuu
              LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
              by Hakuu
              Hi There,

              This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

              After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

              More Details

              TV Model - LG OLED77G1PUA

              Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
              07-12-2023, 02:37 PM
            • jb_Bak
              Sony xbr-65x900c main board issues?
              by jb_Bak
              Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

              Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
              Power Board Connector that goes to Main board
              CN6401
              Pin 01 NC
              Pin 02 NC
              Pin 03 "BL_ON": 0V
              Pin 04 "N/C"
              Pin 05 "STBY 3.3V": 3.5V
              Pin 06 "GND": N/C
              Pin 07 "AC_OFF"...
              09-27-2021, 04:52 PM
            • canadaboy25
              Panasonic TC-P54VT25 No image. A or D board?
              by canadaboy25
              I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

              The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

              I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
              01-17-2021, 01:06 AM
            • Loading...
            • No more items.
            Working...