Re: Dell Monitor blinking LED
See if picofuse PF751 (right above the big filter cap) is blown after you replaced the c5707s.
See if Q743 and Q751 are shorted. These may the FU9024s I refered to as per post #18 and post #2 by UniT3d.
If the above are all good, then you will have to check the main board and make sure that BL_ON is > 3.0V DC.
See if picofuse PF751 (right above the big filter cap) is blown after you replaced the c5707s.
See if Q743 and Q751 are shorted. These may the FU9024s I refered to as per post #18 and post #2 by UniT3d.
If the above are all good, then you will have to check the main board and make sure that BL_ON is > 3.0V DC.
Comment