Re: Medion monitor backlight issue
EDIT: Nvm link was in OP
EDIT: Nvm link was in OP
-
-
Re: Medion monitor backlight issue
Hmmm! this has been on now with full brightness for over 3 hours? still dismantled, bet if I put it back together it will fail again!
RonniesigpicComment
-
Re: Medion monitor backlight issue
Ok been using this for 3 days now with no issues! strange, do they do a burn in when new after assembly? like I said it's like brand newsigpicComment
-
Re: Medion monitor backlight issue
Has been some cold solder joint than. Repaired by re-soldering
Less jewellery, more gold into electrotech industry!
Half of the computer problems is caused by bad contacts 
Exclusive caps, meters and more!Hardware Insights - power supply reviews and more!Comment
-
Re: Medion monitor backlight issue
I think it has had some damp inside the lcd? when I had it on test it was lying face up, after an hour or so there was condensation under the touchscreen setting it upright this has gone, how it got inside who knows
RonniesigpicComment
-
Hello Team,
I'm back with another backlight issue that I thought was simple, but it turned out to be more complex than expected.
Let me provide a brief history: The TV was working well, then one day, the backlight started and shut down. I thought I had an LED issue leading to this behavior, so I replaced the LEDs with brand new ones. However, the issue remains the same.
Next, I replaced the electrolytic capacitors attached to the LED power supply, but the results were the same. I then replaced the driver, a OB3365RP, and did it twice due to the same result.... -
Hello, got an iPad Pro A2378 12.9 5th gen with no backlight. Got another test unit without screen, tested the screen, still no backlight with the test unit.
Figured out the backlight on the screen was bad, ordred a new backlight from mobilesentrix, *carefully replaced it* without damaging the lcd, oh well.
Final result, issue is still there, the screen has no back lights. So i'm back to square one, with 3 hours less and 100$ out, issue still on the screen.
The panel is still ok, i can see the apple in the middle of the screen when it kicks in, just no backlight.
Anyone... -
Hello team,
I'm back with another topic.
It's a 65C715 TCL tv with backlight issue.
But the problem is a bit strange.
When I took this tv from the marketplace backlight didn't work but picture was ok.
Back at home I checked with led tester if led are alive and I can find something different in term of voltage supply => nothing
Putting all back together the tv worked fine for weeks. => Contact issue??
Few moment later the tv has started to have backlight issue back, turning off and on worked sometimes and tv was working.... -
Greetings everyone.
Please I need help with the above monitor.
Below is the summary of what happened and what I have done:
The monitor started by turning off 2 seconds after it was turned on. It displayed with a backlight when it turned on. However, the standby light remains on after it is turned off on its own, I have to press the power button again to turn it on, but it will go back to standby after 2 seconds.
The backlight driver IC is 0b3350cp.
I applied a 370k SMD resistor on the CMP pin which is pin 6, while the other...11-07-2023, 09:12 AM -
Back Story
I just recently purchased a RZ09-01652 Razer Blade 14 Touch v4(2016) as a project. I suspect the original motherboard had overheated and caused board damage to the vrm's for the CPU and GPU as now that motherboard works however will lockup on you often due to hardware clock issues.
So after some research and looking at options for replacement motherboards I got a replacement RZ09-01952 razer blade 14 motherboard which has the 1060 vs the 970m that was in my original motherboard. I have contacted the seller about the motherboard being bad however I doubt they will be...
Comment