Hey guys, same problem as here
Monitor turns on, but white screen.
F1 is blown, replaced it, and it immediately blew again.
Have done some testing, not really too sure what I am looking for. From what I gather from reading other posts about this problem is there is most likely a short.
So I tested the surrounding caps and the one diode, I made notes on the picture itself, I tested the caps on both the ohm setting and the diode setting (don't know if that helps diagnose the problem or not).
Thanks in advance for any help.
Monitor turns on, but white screen.
F1 is blown, replaced it, and it immediately blew again.
Have done some testing, not really too sure what I am looking for. From what I gather from reading other posts about this problem is there is most likely a short.
So I tested the surrounding caps and the one diode, I made notes on the picture itself, I tested the caps on both the ohm setting and the diode setting (don't know if that helps diagnose the problem or not).
Thanks in advance for any help.
Comment