Re: Dell WFP 2007 No image
1 on the left
, is it possible to replace this tiny fuse?
1 on the left
, is it possible to replace this tiny fuse?
-
-
Re: Dell WFP 2007 No image
Yes - steady hand, steady eye, tweezers and a lot of luck.
There are videos on soldering smd components on youtube
http://www.youtube.com/watch?v=EWeAOemTY_E
However before going to a lot of effort you can "piggy back" it that means put a new fuse on top of the old one. You could even use a non smd fuse to try
You need to get the correct rating
https://cdn.badcaps-static.com/pdfs/...5edad6270b.pdfLast edited by selldoor; 04-26-2012, 12:02 PM.Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Dell WFP 2007 No image
Thanks!!! Now, I´m wondering what was the root cause that blows the fuse.Comment
-
Re: Dell WFP 2007 No image
CuriousInventor makes excellent soldering videos. Excellent focus, clarity, and great explanations on WHY the techniques work or not work.
http://www.youtube.com/watch?v=3NN7UGWYmBY--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: Dell WFP 2007 No image
Great Video!!!! I really would like to have that pulse!!! LOL, my hands shakes like a brazilian butt :P .
What I don't know yet, is how to remove the bad fuse.Comment
-
Re: Dell WFP 2007 No image
Like I suggested you could just piggyback it.
If you are sure it is open, its not going to matter if it breaks.
Obviously you are going to need a few extra tools - like this - hah hah
http://www.youtube.com/watch?v=NbQxU...endscreen&NR=1
Or you could do this http://www.youtube.com/watch?v=TyUm6hJ2vK0Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Re: Dell WFP 2007 No image
LOL YEAHHH I Just bought all that stuff!! HAHAHAHAHAHA.
I really would like to know why the fuse went away, cuz If I replaced it what are the possibilities to blow up again?Comment
-
Re: Dell WFP 2007 No image
I am sure that Budm's workshop could match that. Might not be as organized though.
The second video would be the way that I would do it. If you have a practice board have a go at taking them off and putting them back on that will give you the confidence to do it.Comment
-
Re: Dell WFP 2007 No image
I have a friend that can do the job. Let´s see if I can find the replacement.
BTW: Has someone take a look to the Caps measures I uploaded?Comment
-
Re: Dell WFP 2007 No image
Ok, guys I have more news about this problem. We have replaced F1 (fuse) and it blow up again, but this time worst, cuz now the display does not even start.
Any thought?
Do you know if Dell sells the entire board?
Thanks in advance!Comment
-
Re: Dell WFP 2007 No image
Are you talking about F1 on the USB/SUB power supply board?
https://www.badcaps.net/forum/showth...124#post241124Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Please upload pictures using attachment function when ask for help on the repair
http://www.badcaps.net/forum/showthread.php?t=39740Comment
-
Hi everyone,
Looking for some advice or opinions on what to do with a monitor issue I’ve run into. Apologies in advance is this crossovers a few forum categories.
I have a Dell U3425WE, which I've recently replaced with another model. That said, the original unit is still fully functional in terms of the display — it works perfectly over HDMI and DisplayPort. However, the USB-C and Thunderbolt 4 ports have stopped functioning correctly. The Issue:- The 90W Thunderbolt 4 port (circled in the photo) no longer charges or powers any device, including laptops or MacBooks.
- There’s
07-15-2025, 04:55 AM -
Hi.
I kindly ask you to help me solve the problem.
Dell Precision 5510, motherboard AAM00 LA-C361P Rev:2.0
The board turns on, there is no image.
Read more. When the power supply is connected, the front panel indicators light up briefly.
When you press the power button, the button indicator lights up. The board works
there is no image, there is no matrix initialization, there is no image on HDMI.
When turned on, the fans do not spin, but when they warm up they start spinning.
When you turn off the button, the fans spin up to full speed for a short... -
My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?
Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?
My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
I have tried multiple different Dell power adapters. My Dell... -
I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered... -
Hello. I have a problem with my AOC 27 monitor, specifically model Q27G2WG4, which I have been using for 3 years. The monitor stopped turning on: when I turn it on, the backlight turns on, the indicator starts glowing white, but the logo on the screen does not appear, and there is no image. However, if I check in the Windows system, the monitor is displayed as connected and working. I tried connecting it via HDMI and DP, but the result remains the same. If I turn the monitor on and off multiple times, it will eventually start and work. However, when the monitor is working, there are no issues....
Comment