Veiwsonic VA912B issue.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JDW
    New Member
    • May 2011
    • 2

    #1

    Veiwsonic VA912B issue.

    Hi im new to this forum.


    Ok first if i plug in the moniters A/C cable it works fine but when the VGA cord is plugged in the screen goes black and the power light flashes and is GREEN. I had to get the old crt out just to write this so any help would be appreciated.
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #2
    Re: Veiwsonic VA912B issue.

    Open the lcd up and post pictures of your boards following the instructions in my sig file below.

    You will also need a multimeter for troubleshooting.
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

    • JDW
      New Member
      • May 2011
      • 2

      #3
      Re: Veiwsonic VA912B issue.

      Ive decided to just scrap it. i thought it would be something simpler to fix but i don't have the necessary tools

      Comment

      • momaka
        master hoarder
        • May 2008
        • 12160
        • Bulgaria

        #4
        Re: Veiwsonic VA912B issue.

        Well if you have decided you don't want to fix it, it might be a good idea to at least put it on craigslist or kijiji. There's always other people who would like to fix it and use it. You may even fetch $10 or more for it, depending on the area you live in .
        Last edited by momaka; 05-14-2011, 10:26 PM.

        Comment

        Related Topics

        Collapse

        • cajoeg
          Insignia NS-LCD019-09 issue: Power light turns blue for 3 seconds, the flashes red before going solid read again
          by cajoeg
          Hello, I'm new to the group and to trying to repair a LCD TV. During the past few years, I've been collecting/repairing/restoring vintage personal computers (Commodore, Apple II, Atari, TRS-80, Texas Instruments, and Timex Sinclair). This has been my retirement hobby. Now I've gotten interested in trying to repair a LCD TV that I have and used regularly when working on vintage computers.

          The LCD I'm working on is a Insignia NS-LCD019. I've downloaded the service manual that I could find, but it must be a different revision since not too many items in the service manual match the TV...
          02-10-2025, 04:01 PM
        • rounin
          MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
          by rounin
          Hi everyone,

          I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

          🛠 Original Issue
          The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
          Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

          I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

          ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
          04-19-2025, 01:18 AM
        • ugamazing
          Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
          by ugamazing
          I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

          We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
          12-17-2024, 07:05 PM
        • Simone Vergani
          Alienware 15 R2 Service Tag: DL7NN32 ISSUE (Battery is not charging)
          by Simone Vergani
          Hello everyone,

          I'm experiencing an issue with my Alienware 15 R2 (Service Tag: DL7NN32). The laptop works perfectly when connected to the AC adapter — it powers on and functions normally. However, the battery does not charge. If I disconnect the DC adapter, the laptop shuts down immediately, as the battery is at 0%. I have replaced the battery with a new compatible one, but the issue persists. I also replaced the AC adapter with a compatible one, but the battery still doesn't charge.

          To assist with troubleshooting, I'm attaching two power circuit schematics:
          • Power
          ...
          03-05-2025, 02:25 PM
        • wizard13
          Dynabook Satellite Pro C50D-B-100 - BIOS Issue, Black Screen
          by wizard13
          Hello everyone,

          I am experiencing a BIOS-related issue with my Dynabook Satellite Pro C50D-B-100. When I power on the laptop, the screen stays black, and there is no response from the system. I suspect a corrupted BIOS.

          I have checked the forum and the available documentation but could not find a solution specific to my issue.
          • Brand & Model: Dynabook Satellite Pro C50D-B-100
          • Part Number (P/N): PYU13E-00C00PFR
          • Serial Number (S/N): 22028896H
          • System Configuration (SC): A1PYU13E1127
          • Motherboard Model: IP3_ACN16_MB_V21_20211222A
          • Power Input: DC 19V –
          ...
          02-28-2025, 02:43 AM
        • Loading...
        • No more items.
        Working...