Dell SE198WFPf Bright Horizontal Band on Top Third of the Screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • snorlin
    Member
    • Jan 2011
    • 13
    • USA
    #1

    Dell SE198WFPf Bright Horizontal Band on Top Third of the Screen

    Hello,

    Saw one other person in this forum with a horizontal band on a Hannspree, but no fix. The band is there all the time with either DVI or VGA signals. I have an ESR meter, have checked caps, and all are still very good. Any help would be appreciated. Thanks.
    Attached Files
    Tags: None
    • Rtech
      Badcaps Legend
      • Jul 2010
      • 1095
      #2
      Re: Dell SE198WFPf Bright Horizontal Band on Top Third of the Screen

      Most probably the Screen itself, and replacement would be the solution.

        Comment

        • jetadm123
          Badcaps Legend
          • Feb 2010
          • 2169
          #3
          Re: Dell SE198WFPf Bright Horizontal Band on Top Third of the Screen

          Have you tried reseating the flat ribbon cable from the logic board to the LCD control board at both ends? Bad solder connection on logic board? If not, then it's probably an issue with the LCD control board.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Ryan.man
              Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
              by Ryan.man
              Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

              My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

              This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
              02-04-2025, 12:23 PM
            • kotel studios
              Samsung LC32HG70QQUXEN - vertical and horizontal stripes across the screen
              by kotel studios
              Hi,

              Just now my Samsung LC32HG70QQUXEN monitor gave up on me. On cold boots I get many vertical stripes going across the screen (see the attached picture). After it runs for 1-2 minutes those go away but there are horizontal stripes going across the whole screen no matter of the input and PCs I use. (couldn't take an picture of it since the image size goes to 20MB and the camera doesn't pick them up)

              In a video about a 27" monitor with an similar issue the guy removes one resistor and supposedly the entire monitor goes back to life? For sure this fix is only temporary....
              08-06-2025, 02:07 AM
            • reformatt
              Macbook Air M2 A2681 Kernel panics after screen replacement
              by reformatt
              Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

              It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
              07-31-2025, 08:37 PM
            • smic717394
              iphone XS turns off when press on screen.
              by smic717394
              Hi,

              I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
              07-25-2024, 10:16 AM
            • kdaniel
              Hitachi 58HK6100U - Horizontal Lines (Bottom third of the screen)
              by kdaniel
              As stated by the person I collected the TV from, it just stopped working overnight. However, I still gave it a go to try and repair it.

              There is a thread on the same TV but with slightly different issues where they had to tape connection points on the ribbon cable, so I want to see if this is repairable by any chance.

              After bringing it home and plugging it in, the TV turned on with its backlight working but had no picture. After removing the back cover, the first thing I tried is to unplug one of the ribbon cables and the situation is as follows.

              Left...
              11-16-2022, 09:23 AM
            • Loading...
            • No more items.
            Working...