Hanns-G HG281D, LCD Monitor no power

Collapse
X
Collapse
 
  • Page of 44
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 6 7 8 9 10 11 44 template Next
  • Mishannya
    Badcaps Junior
    • Sep 2010
    • 31
    • USA
    #1

    Hanns-G HG281D, LCD Monitor no power

    Hi all, I have Hanns-G HG281D LCD monitor with no power problem.
    I inspected visually all caps on PS board (PSM217-404-H-R), they are look absolutely normal. Also I tested all big semiconductors, fuses, coils, transformers and resistors. Nothing found bad so far. If some body had similar problem with this issue please help. Thanks.
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: Hanns-G HG281D, LCD Monitor no power

      Originally posted by Mishannya
      If some body had similar problem with this issue please help.
      1) Does the power LED come on at all or stay off?

      2) If you have a multimeter, check the secondary voltages on the connector between the power board and logic card. You should get 5V DC at least one of the pins.

      3) Post clear focused pictures AFTER reading

      https://www.badcaps.net/forum/showthread.php?t=1868

      4) Please do not post pictures inline.

      5) Take your boards to a window on a sunny day, turn flash off, and use macro mode. Take a top down view of all your boards (front and back). Make sure the photo is legible so that we can read the PCB printing clearly. A shutter speed of 1/125 or faster will produce nice clear focus pictures. Try to get a photo that is 2000x2000 resolution or as close as possible.

      6) Here is an example of the pictures we want.

      https://www.badcaps.net/forum/showpos...94&postcount=1
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        • Mishannya
          Badcaps Junior
          • Sep 2010
          • 31
          • USA
          #3
          Re: Hanns-G HG281D, LCD Monitor no power

          Q: 1) Does the power LED come on at all or stay off?
          A: No, it doesn't.
          Q: 2) If you have a multimeter, check the secondary voltages on the connector between the power board and logic card. You should get 5V DC at least one of the pins.
          A: The 5V DC presents on the power board and logic card (actually 4.4V ~ 4.9V DC)
          Thanks.
          Attached Files

            Comment

            • retiredcaps
              Badcaps Legend
              • Apr 2010
              • 9271
              #4
              Re: Hanns-G HG281D, LCD Monitor no power

              Originally posted by Mishannya
              A: The 5V DC presents on the power board and logic card (actually 4.4V ~ 4.9V DC)
              Good photos.

              Regarding the 4.4 ~ 4.9V DC, is that fluctuating or do you mean one pin is 4.4V and another is 4.9V DC. 4.4V DC is low and is suspect.

              On CN7, do you see 12V DC? The picture of the logic board shows 12V DC printed on the PCB.
              --- begin sig file ---

              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

              Please do not post inline and offsite as they slow down the loading of pages.

              --- end sig file ---

                Comment

                • Mishannya
                  Badcaps Junior
                  • Sep 2010
                  • 31
                  • USA
                  #5
                  Re: Hanns-G HG281D, LCD Monitor no power

                  4.4 ~ 4.9V DC, is fluctuating on CN5 of the logic board.
                  And there is no 12V DC On CN7.

                    Comment

                    • retiredcaps
                      Badcaps Legend
                      • Apr 2010
                      • 9271
                      #6
                      Re: Hanns-G HG281D, LCD Monitor no power

                      Originally posted by Mishannya
                      4.4 ~ 4.9V DC, is fluctuating on CN5 of the logic board.
                      And there is no 12V DC On CN7.
                      If the voltage is fluctuating, that could suggest bad capacitors. Capacitors don't have to bloat in order to be bad. They can be out of uF spec or have high ESR (ohm).

                      The heat shield makes it difficult to see, but you can try measuring the voltage across the capacitors that are on the 5V rail. Any cap that is 10V or less is probably on the 5V rail.

                      You can probably trace CN5 to the caps that feed it the 5V DC.
                      --- begin sig file ---

                      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                      Please do not post inline and offsite as they slow down the loading of pages.

                      --- end sig file ---

                        Comment

                        • Mishannya
                          Badcaps Junior
                          • Sep 2010
                          • 31
                          • USA
                          #7
                          Re: Hanns-G HG281D, LCD Monitor no power

                          I'll test all caps by ESR meter tomorrow. Thanks.

                            Comment

                            • retiredcaps
                              Badcaps Legend
                              • Apr 2010
                              • 9271
                              #8
                              Re: Hanns-G HG281D, LCD Monitor no power

                              Originally posted by Mishannya
                              I'll test all caps by ESR meter tomorrow. Thanks.
                              What DC Voltage do you get across the main filter capacitor? It should be a steady mains * 1.4. Be careful measuring this voltage.
                              --- begin sig file ---

                              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                              Please do not post inline and offsite as they slow down the loading of pages.

                              --- end sig file ---

                                Comment

                                • Mishannya
                                  Badcaps Junior
                                  • Sep 2010
                                  • 31
                                  • USA
                                  #9
                                  Re: Hanns-G HG281D, LCD Monitor no power

                                  168V DC across the main filter capacitor.

                                    Comment

                                    • retiredcaps
                                      Badcaps Legend
                                      • Apr 2010
                                      • 9271
                                      #10
                                      Re: Hanns-G HG281D, LCD Monitor no power

                                      Originally posted by Mishannya
                                      168V DC across the main filter capacitor.
                                      Okay, that is good. Post your results for the ESR tests tomorrow. You may want to measure the capacitance of the caps as well.
                                      --- begin sig file ---

                                      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                      Please do not post inline and offsite as they slow down the loading of pages.

                                      --- end sig file ---

                                        Comment

                                        • seanc
                                          Badcaps Legend
                                          • Nov 2008
                                          • 1319
                                          #11
                                          Re: Hanns-G HG281D, LCD Monitor no power

                                          It could be a trick of the light, but it looks like one of the caps has a slight bulge under that heatsink.

                                            Comment

                                            • retiredcaps
                                              Badcaps Legend
                                              • Apr 2010
                                              • 9271
                                              #12
                                              Re: Hanns-G HG281D, LCD Monitor no power

                                              Originally posted by Mishannya
                                              4.4 ~ 4.9V DC, is fluctuating on CN5 of the logic board.
                                              And there is no 12V DC On CN7.
                                              Odd, on the back of the power board, there are markings for 5VSB, 5V, and 12V.

                                              On the backside, there should be a multi legged IC that is the SMPS or PWC controller. I can't make out the part numbers, but can you list

                                              U101, U501, U801, U102, and U202?
                                              Last edited by retiredcaps; 09-26-2010, 04:51 PM.
                                              --- begin sig file ---

                                              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                              Please do not post inline and offsite as they slow down the loading of pages.

                                              --- end sig file ---

                                                Comment

                                                • Mishannya
                                                  Badcaps Junior
                                                  • Sep 2010
                                                  • 31
                                                  • USA
                                                  #13
                                                  Re: Hanns-G HG281D, LCD Monitor no power

                                                  U101-L6562D, U501-3037CS, U801-LM324DG, U102-L6598D,
                                                  and U202-LMC555CM.
                                                  Attached Files

                                                    Comment

                                                    • momaka
                                                      master hoarder
                                                      • May 2008
                                                      • 12175
                                                      • Bulgaria
                                                      #14
                                                      Re: Hanns-G HG281D, LCD Monitor no power

                                                      U7 on the video board looks very discolored. Check the DC voltage on it with your multimeter by placing the negative probe on ground and the positive probe on the tab of U7. It's probably a 3.3v regulator. Also check the DC voltage on U8, same way as for U7. Post what voltages you get.

                                                        Comment

                                                        • Mishannya
                                                          Badcaps Junior
                                                          • Sep 2010
                                                          • 31
                                                          • USA
                                                          #15
                                                          Re: Hanns-G HG281D, LCD Monitor no power

                                                          U7 reads (2.9V~3.3V), U8 (1.6~1.8)

                                                            Comment

                                                            • jetadm123
                                                              Badcaps Legend
                                                              • Feb 2010
                                                              • 2169
                                                              #16
                                                              Re: Hanns-G HG281D, LCD Monitor no power

                                                              Nice photos! If you look at your second photo, at the lower left , you'll see voltages silk- screened on the board: 5V, 12V and 24V. You've verified the 5V, but not the 12V and 24V, You'll have to trace these outputs back to the duo diode paks mounted on the heatsink. Lack of 12V and 24V can be caused by a blown fuse, bad filter caps or bad duo-diode paks.

                                                              Also, in the second photo, did you check Q501 and Q502 for shorts? What are their part numbers?

                                                              A photo of the entire power/inverter board with the heatsink covers off would be nice.
                                                              Last edited by jetadm123; 09-26-2010, 09:56 PM.

                                                                Comment

                                                                • retiredcaps
                                                                  Badcaps Legend
                                                                  • Apr 2010
                                                                  • 9271
                                                                  #17
                                                                  Re: Hanns-G HG281D, LCD Monitor no power

                                                                  Originally posted by Mishannya
                                                                  U101-L6562D, U501-3037CS, U801-LM324DG, U102-L6598D,
                                                                  and U202-LMC555CM.
                                                                  3037CS is the PWM controller. The datasheet is at

                                                                  http://pdf1.alldatasheet.com/datashe...IRU3037CS.html

                                                                  Download and save for future reference so we can verify the correct voltages.
                                                                  --- begin sig file ---

                                                                  If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                                                  We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                                                  Please do not post inline and offsite as they slow down the loading of pages.

                                                                  --- end sig file ---

                                                                    Comment

                                                                    • retiredcaps
                                                                      Badcaps Legend
                                                                      • Apr 2010
                                                                      • 9271
                                                                      #18
                                                                      Re: Hanns-G HG281D, LCD Monitor no power

                                                                      Originally posted by Mishannya
                                                                      U7 reads (2.9V~3.3V), U8 (1.6~1.8)
                                                                      The fluctuation is not good. It should be a solid 3.3V and 1.8V DC.
                                                                      --- begin sig file ---

                                                                      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                                                      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                                                      Please do not post inline and offsite as they slow down the loading of pages.

                                                                      --- end sig file ---

                                                                        Comment

                                                                        • retiredcaps
                                                                          Badcaps Legend
                                                                          • Apr 2010
                                                                          • 9271
                                                                          #19
                                                                          Re: Hanns-G HG281D, LCD Monitor no power

                                                                          Originally posted by jetadm123
                                                                          You'll have to trace these outputs back to the duo diode paks mounted on the heatsink.
                                                                          If the duo diode voltages are fluctuating as well, I believe it could pointing to a bad transformer or a bad PWM controller.

                                                                          If the duo diode voltages are solid 5V, 12V DC, etc, then it is likely bad caps causing the fluctuations at the connectors.

                                                                          PS. What type of multimeter brand and model number do you have?
                                                                          Last edited by retiredcaps; 09-26-2010, 10:32 PM.
                                                                          --- begin sig file ---

                                                                          If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                                                          We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                                                          Please do not post inline and offsite as they slow down the loading of pages.

                                                                          --- end sig file ---

                                                                            Comment

                                                                            • retiredcaps
                                                                              Badcaps Legend
                                                                              • Apr 2010
                                                                              • 9271
                                                                              #20
                                                                              Re: Hanns-G HG281D, LCD Monitor no power

                                                                              Just thinking about this a little bit more, I think based on the fluctuating 4.4 to 4.9V DC, that is probably on the 5V SB standby rail. So on the solder side, trace where the 5V SB goes to and test those caps.

                                                                              So focus on the getting stable 5V SB voltage first and foremost.
                                                                              Last edited by retiredcaps; 09-26-2010, 10:42 PM.
                                                                              --- begin sig file ---

                                                                              If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

                                                                              We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

                                                                              Please do not post inline and offsite as they slow down the loading of pages.

                                                                              --- end sig file ---

                                                                                Comment

                                                                                Previous 1 2 3 4 5 6 7 8 9 10 11 44 template Next

                                                                                Related Topics

                                                                                Collapse
                                                                                • Tynan Dill
                                                                                  Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                                                                                  by Tynan Dill
                                                                                  I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                                                                                  Upon bringing it home and plugging it up, it showed a standby light.

                                                                                  I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                                                                                  The screen seems to blackout and stay black, but with a flashlight I can see the display.

                                                                                  With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                                                                                  Assuming...
                                                                                  ORIGINAL POWER SUPPLY BOARD
                                                                                  7 Photos
                                                                                  11-22-2024, 01:46 PM
                                                                                • PantherDave
                                                                                  Microsoft Surface Pro (5th gen) model 1796 - no power
                                                                                  by PantherDave
                                                                                  Hi all!

                                                                                  I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                                                                                  I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                                                                                  https://www.badcaps.net/forum/troubl...-hardware-devi...
                                                                                  05-29-2024, 02:01 PM
                                                                                • GLISIT
                                                                                  Asus Probook P5440UF-XB74 power issue
                                                                                  by GLISIT
                                                                                  Hi all,

                                                                                  TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                                                                                  I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                                                                                  A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                                                                                  01-16-2025, 02:29 PM
                                                                                • sam_sam_sam
                                                                                  Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                                                                                  by sam_sam_sam
                                                                                  I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                                                                                  One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                                                                                  03-31-2024, 02:12 PM
                                                                                • mikey5791
                                                                                  Philips 196V3L monitor power led off
                                                                                  by mikey5791
                                                                                  Hi, i was given this lcd monitor last week with the issue of power led blinking. Upon checking the power board, i found 2 pieces electrolytic caps bulged and replaced them.
                                                                                  Later, when i switched on ac power and detected 5v and 15v dc at output pins. But as soon as i pressed on the front power button, the led on power button lights for 1 second and it turns off.

                                                                                  So, i tried disconnect the flex ribbon cable from t con board. But all i got is a white screen with nothing on. I suspect there is something short somewhere that prevent the display being turned on. Can someone with...
                                                                                  01-25-2024, 07:52 PM
                                                                                • Loading...
                                                                                • No more items.
                                                                                Working...