Pure Evoke 3
I have a dead Pure Evoke 3 DAB radio. There are voltages on main PCB but I have no manual and have searched the internet but cannot find any information at all about receiver. Suggestions would be good apart from return to repair centre.
-
-
Re: Pure Evoke 3
foto's would help,
some DAB radio's are known to have shitty caps in them. -
Re: Pure Evoke 3
Sorted out the problem which I believe may be a common to the Evoke3.
There is a metal heatsink on left side of chassis, and beneath is a wire link from a transistor collector to a surface mount diode.The connection to the diode was dry jointed, resoldered and it all works fine, a lovely radio.Comment
-
Re: Pure Evoke 3
Hello All. Im new to this forum and have joined to seek help in repairing the main board on a Pure Evoke 3 dab radio. The radio is completely dead, however there is a very quiet sound which comes from the speakers if the 12vsupply lead is pulled out whilst volume is turned to full. The sound is like a distant firework exploding, ie a very low power boom. I suspect the issue is to do with the main board and hence I thought Id join this forum and discuss it with you guys. If you need any photos, please just ask I will be happy to provide all thats needed. PS, ive been around all the soldered joints and reflowed them.
Looking forward to chatting with someone about this please.
Kind regards
DeggsyComment
-
Re: Pure Evoke 3
follow maxwell's description - i dont think anybody else has worked on them here.
to be blunt, dab was invented by the bbc to get rid of pirates.
it worked - nobody i know has any interest in dab radio's because they wont recieve the channels people actually want!!
analog forever! (in FM with a stereo carrier and RDS
)
Comment
-
Re: Pure Evoke 3
Notwithstanding the trifling response below (waste of electrons sir), are there are meaningful responses likely to come out of this forum? Sorry but responses for the sake of response press my 'irritate me' button. There is nothing in the world which cannot be repaired without the right mindset
Regards deggsyComment
-
Re: Pure Evoke 3
well upload some foto'sComment
-
Re: Pure Evoke 3
I have a dead Pure Evoke-3 as well and would appreciate some help from someone who has managed a cure themselves, although it may not be from the same cause!
Regards
DougNComment
-
hi
ive got a modern digital clock radio approx 15yrs old
my question is how long can a clock radio or a simple radio last ss farcas operating hours?
since elec components have limited hour lifecspan i would imagine the radio or clock radio would eventually fail.
the reason i ask is because i have my clock radio on radio function 24/7 for the past 7 years and its still working fine....i leave the radio on ..never turn off past 7years...thats approx 60000 hours
it uses very little power just a few watts i would imagine that may have something... -
Dear all,
I have this old radio clock by Sony from the early 80s, I guess. The clock display works, but is dim, the function board appears to be OK - but the radio unit shows no signs of life. It doesn't produce a single noise, crack or anything from either FM or AM band. It's like it doesn't even power up.
i opened the radio and it is full of some TRACON gray capacitors. They only have their negative strip printed, voltage and capacitace markings - no series, no temperature marking, nothing else.
My question is, do you know of this brand of capacitors and how bad are... -
Hello All,
I have an issue with my Majority PETERHOUSE GRADUATE Internet Radio, it keeps rebooting at the boot logo Welcome screen. I have an another forum active in other website but due to lack of response I am posting the same here. I am positing a link below that has pictures including all the troubleshooting I have tried, appreciate if someone can take a look and give me any suggestions.
https://www.hifivision.com/threads/m...-screen.98243/
Troubleshooting Summary: Majority Internet Radio - Flash Chip... -
This specification for the HP EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point boardview and EliteDesk 800 G3 + OfficeConnect OC20 2x2 Dual Radio 802.11ac (RW) Access Point schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information....09-12-2024, 02:00 PM
-
Hello Guys! I have trouble with my car radio Kenwood KDC 3051G I hope someone more knowledgeable can help me, I tried everything in my power that I stumbled upon online.
My radio is permanently in demo mode, it says Press Volume Knot Cancel Demo and when I press it nothing happens.
- Tried to unplug radio and plug it back in into power,
- Tried to reset radio by holding reset button key for 5,10,30 seconds while in power and without power, plugging it back in, it wouldn't work.
- Tried to hold 3,6 while turning it back on and then pressing 1,2...
Comment