Re: Pure Evoke 3
Sorted out the problem which I believe may be a common to the Evoke3.
There is a metal heatsink on left side of chassis, and beneath is a wire link from a transistor collector to a surface mount diode.The connection to the diode was dry jointed, resoldered and it all works fine, a lovely radio.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung Soundbar HT-E8200
Solved. The sound o/p IC had blown apart. Replacement fitted, all now fine.
Leave a comment:
-
Pure Evoke 3
I have a dead Pure Evoke 3 DAB radio. There are voltages on main PCB but I have no manual and have searched the internet but cannot find any information at all about receiver. Suggestions would be good apart from return to repair centre.
-
Re: Samsung ps43d490 cracked screen
Thanks, so basically a useless cause!!
Leave a comment:
-
Samsung ps43d490 cracked screen
I have a Samsung ps43d490a with a cracked screen. As it is probably useless to repair I thought it would be good to learn on as I used to repair CTV's 15 years ago. The y main board has a S/C RJP63K2 FET. As I have no circuit it is guess work, and I am assuming it supplies HT for screen. Is it possible to repair boards and fire up tv WITHOUT screen connected? If anyone has circuit it would be useful.
Cheers
-
Samsung Soundbar HT-E8200
Help required with this soundbar which will not connect to sub woofer or the internet. Woofer blue link light comes on then goes to standby.
-
Re: LG LE3300 led tv
Cheers, sorry for delay in reply, have been away.
Leave a comment:
-
LG LE3300 led tv
Set works but with over bright picture. Can sets own remote be used as service remote?. Or does anyone have solution!
No activity results to display
Show More
Leave a comment: