I also removed the headphone jack, just to get it out of the equation (however it is good)
Announcement
Collapse
No announcement yet.
Pioneer amplifier A-205 Relay not clicking after a mistake i made
Collapse
This topic has been answered.
X
X
-
ok i am back to a good middle point
i found a bad connector! which made all the late issues
i fixed it properly and now i am back to:
just no left channel, headphones are very good, no relay issues, overall sound quality and volume really good, no noises from the pot at all
i have blobbed the direct switch pins so i am testing now with much less possible issues
where the problem could be?
i tried to move the other larger cable which looks good but nothing at all at that channel, i think if the input was the problem i would never get signals from both channels with the headphones right?
attached was the bad cable (mainly from coz the pcb is hanging from it)
Comment
-
hmm i found the problem
it is from the "good" end of the same cable i fixed its other end, the connector looks so intact but i discovered the problem when it twist, so aparently it needs to be cut and remade, i know i have not done anything wrong in the assembly it is just that cable is so evil, it never failed the dmm tests also
but the unit is working great now
thank you very much
Comment
Comment