Need help with some old record players

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ncovert
    Badcaps Veteran
    • Feb 2011
    • 291
    • USA
    #1

    Need help with some old record players

    I have a Magnavox 3p2511 record changer. It needs a new needle and I also want to know more about it. I can't find any info on it except a picture on antiqueradios.com. It looks like a 1960's era unit, maybe early 70's at latest? Could someone help me?

    I also need a new belt and cartridge/needle for a JCPenny MCS 6502 turntable from around 1979 or 1980.
    Tags: None
    • delaware74b
      Badcaps Veteran
      • Apr 2009
      • 628
      • USA
      #2
      Re: Need help with some old record players

      I found the following link for your JCPenney belt. They may have a resource for the stylus as well.

      http://www.turntablebasics.com/belts/penney.html
      Stupidity should be a crime, especially for drivers. I have NO patience for them.

        Comment

        • ncovert
          Badcaps Veteran
          • Feb 2011
          • 291
          • USA
          #3
          Re: Need help with some old record players

          Originally posted by delaware74b
          I found the following link for your JCPenney belt. They may have a resource for the stylus as well.

          http://www.turntablebasics.com/belts/penney.html
          Thanks. Now I need a needle and more info about the Magnavox

            Comment

            • ncovert
              Badcaps Veteran
              • Feb 2011
              • 291
              • USA
              #4
              Re: Need help with some old record players

              Does anyone know anything about the Magnavox 3P2511? If so, that would be great! I really wanna know more about it

                Comment

                • ncovert
                  Badcaps Veteran
                  • Feb 2011
                  • 291
                  • USA
                  #5
                  Re: Need help with some old record players

                  Problem is still not solved yet. :0/

                    Comment

                    • delaware74b
                      Badcaps Veteran
                      • Apr 2009
                      • 628
                      • USA
                      #6
                      Re: Need help with some old record players

                      Google is your friend for finding items such as your stylus.

                      In 1 minute, I found the following link for your Magnavox:

                      http://www.turntableneedles.com/MAGN...3_c_50111.html
                      Stupidity should be a crime, especially for drivers. I have NO patience for them.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • harp
                          Needle protection for small current instruments
                          by harp
                          Just want to know is there some common method to protect needle from crashing to end, if the meter is galvanometer or microampermeter with both side movement, needle in center?

                          If it comes to fast and high unbalance on bridge, the needle was smash and bent. Some electronic circuit might help but it should not interference with measurement if value is in ok range....
                          01-16-2023, 12:11 PM
                        • Doesronnieevenlift
                          Help a noob! Wson8 Pogo/Needle Adapters to read/Write
                          by Doesronnieevenlift
                          Hi all,

                          I had recently tried to reflash the bios on a dell latittude that has a Wson8 Chip however to no avail.

                          My question is, Has anyone had much success using the Pogo/Needle adapters to read and write bios without removing the chip from the main board?

                          I seem to struggling with the solder process wofh my reflow station and currently have 4 machines waiting for a bios mod/reflash.

                          For context I have just ordered a EZP2019 SPI flash so this is what I would be using alongside the Pogo Adapter.

                          Apologies if this is the wrong subcategory....
                          06-22-2025, 04:51 AM
                        • Babbar
                          1980s Holz Her 2420 belt sander - Only works when speed control at maximum
                          by Babbar
                          My fathers belt sander from the 80s which i very much would like to continue using has an issue with the speed control. The machine works fine on maximum speed but will not turn or give any sign of life when on any other setting. The speed control is a dial going from 1-6 although implemented as a potentiometer without distinct steps. I took the machine apart and measured each component individually, all components and measurements have been captioned in the attached pictures. The Triac did not get identified correctly using my cheapo component tester, i don't know if this is user error, if the...
                          11-13-2024, 01:54 AM
                        • Xenon-Codex
                          Yamaha Bluray players
                          by Xenon-Codex
                          Got two Yamaha blueray players to check (they were going to e-waste), the other don't start at all (bulged caps in the PSU) and the upper one starts but the display is very dim. Which one is better unit? ...
                          08-02-2024, 11:20 AM
                        • mecha1166
                          Tascam CC-222MKIV Need PLAY / RECORD button assy on CD side.
                          by mecha1166
                          Hi. A customer brought in a Tascam CC-222MKIV. Play/Record buttons on CD are broken. I am looking for a mechanical parts breakdown so I can get the part number for this key assy. I found the schematic online, and I can tell you the schematic locations for those switches themselves. There is a plastic assembly with buttons that each have shafts to poke the surface switches on the circuit board right behind the faceplate. That is what I need. Thanks!
                          07-25-2024, 01:49 PM
                        • Loading...
                        • No more items.
                        Working...