Yamaha amplifier emx512sc
HAVE A COMPUTER MODEL CONSOLE YAMAHA EMX512SC.SOMEONE could facilitate the schematic, AS TO CHANGE THE SOURCE TRANSISTORS INVESTOR, I WILL BURN THE 2 CONTROLLERS ... XPECTED
-
HAVE A COMPUTER MODEL CONSOLE YAMAHA EMX512SC.
SOMEONE could facilitate the schematic, AS TO CHANGE THE SOURCE TRANSISTORS INVESTOR, I WILL BURN THE 2 CONTROLLERS ... XPECTED -
Re: Yamaha amplifier emx512sc
language barrier?
post pics of the damage.
that will help more than anything. -
Re: Yamaha amplifier emx512sc
This site has the service manual for the EMX512SC
http://www.free-service-manuals.com/...Manual_L92120/
For $5 you can access the site database & download as much as you want for 7 days.
mxslick...Is there really any need to insult a member with that attachment whose native language isn't English?
Edit... found a free site to download fromLast edited by Radio Fox; 11-28-2010, 08:51 AM.________________________________________________
Invisible airwaves crackle with lifeBright antennae bristle with the energy________________________________________________Comment
-
Re: Yamaha amplifier emx512sc
It was intended to be humorous and not insulting...no offense was intended. It is a pic I have used on other forums when an OP isn't clear or understandable. Apologies to anyone who was offended.
kc8adu made a valid point..the OP is not clear and pictures would be helpful.Last edited by mxslick; 12-02-2010, 02:51 PM.Comment
-
Belongs to my son and he just says it stopped turning on. Any help greatly appreciated. Theres 240v in and fuse is ok but no power anywhere else.
-
Hi All,
I have a Yamaha A-520 that has no sound output.
I notice after power up the protection protection relay does not click in.
I'd appreciate any pointers on where to start.
Many thanks.
Service Manual below:
https://www.badcaps.net/forum/attach...1&d=1641841819... -
First time dealing with one of these 2023 16" units, and the board model is 820-02917. No schematic available from what I can tell, but a somewhat similar one in 820-02918. I am going to reference certain chips using the 02918 schematic because it will at least let you know what I'm looking at:
Unit had liquid-damage to U5500/UF400/UF500 areas. Had to do a ton of precision cleaning since we don't have any parts for this model yet. Got everything cleaned up but had a few resistors with burned pads that we replaced fine, but without knowing where to check for continuity, hard to...02-17-2025, 03:30 PM -
My childhood best friend was killed about 9 years ago. His parents are finally letting go of his things, and they offered me his Polk RTi100 tower speakers. The Polk RTi100 towers are one of a handful of designs from the early 2000s that is a full range 3-way tower with a built-in self-powered subwoofer. This is accomplished with a plate amp integrated into the speaker input panel.
I think they used them for a while, but they've been sitting for at least a few years now. After about 40 hours of driving to their house and back (both they and I have moved in the last 9 years) I got... -
Help Needed: Yamaha RX-V485 Network Issue After Firmware Update (WN9711 Error)
Hi everyone,
I'm facing an issue with my Yamaha RX-V485 receiver. During a firmware update, the process failed, and now the USB, Bluetooth, and network functionalities are not working. Occasionally, the receiver displays the error code WN9711.
I came across Yamaha Technical Bulletin No. 0103, which describes a similar issue for models like the RX-V4A, RX-V6A, and RX-A2A. According to the bulletin, the issue can be resolved by shorting soldering points (e.g., J260 for RX-V4A or...
Comment