hi all! Greetings!
Benq fp531 monitor q5t3
1 .- I do not ON, nor led stanby.
Check in tl1451acn ic751
no voltage pin 5
pin 10 is 14 volts ...
any information on this
I would appreciate each other, help...
rkawa
Richard
Last Activity: 10-05-2011, 05:40 PM
Joined: 11-24-2010
Location: MEXICO DF
-
-
Samsung sync master 632nw
DEFECTS: MONITOR ONLY WORK WITH POWER CABLE,
WITHOUT THE VIDEO CABLE.
WITH A MESSAGE ON SCREEN "searching for signal."
THE CABLE ESTACONECTADO
VIDEO, IS OFF.
CONNECTING THE GOES OUT VIDEO.
WITH LED FLASHING Ignition 3 seconds.
ANY INFORMATION WILL BE OF GREAT INCOME -
Re: SAMSUNG Sync Master 632NW... -
SAMSUNG Sync Master 632NW
HELLO GOOD AFTERNOON
I HAVE A PROBLEM WITH A MODEL SAMSUNG 632NW LCD MONITOR. AFTER WORK BUT THIS GOES BACK ENCERDER BUT TRY NOT WORK FOR SEVERAL DAYS .....
ANY INFORMATION would be helpful THANKS
...
-
-
Re: Monitor LCD DELL E153FPD
THANKS FOR THE INFORMATION, AND THEN I get to work on those components ....
ATTE: RICARDO. MEXICO CHIAPASLeave a comment:
-
Re: Monitor LCD DELL E153FPD
Yes, indeed is a board with benq (ic751: Tl1451acn), good and put a light behind you seen this workingLeave a comment:
-
Yamaha amplifier emx512sc
HAVE A COMPUTER MODEL CONSOLE YAMAHA EMX512SC.
SOMEONE could facilitate the schematic, AS TO CHANGE THE SOURCE TRANSISTORS INVESTOR, I WILL BURN THE 2 CONTROLLERS ... XPECTED -
Monitor LCD DELL E153FPD
https://[url]https://www.badcaps.net...IDE ME .......[url]https://www.badcaps.net/forum/images/icons/icon4.gifHola[/url]! tengo problema con un Monitor DELL E153FPD.
PLEASE I NEED ME ON THE FAULT EAST.
* NO MONITOR SIGNAL LIGHT, BUT NOT AS LIGHT LAMPS CAN TRY?
ANYONELast edited by rkawa; 11-24-2010, 01:43 PM.
No activity results to display
Leave a comment: