Focusrite 2i2 4i4 3rd gen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • electroelef
    Senior Member
    • Jun 2014
    • 57
    • United Kingdom

    #1

    Focusrite 2i2 4i4 3rd gen

    Hi Guys

    I am fighting a dilemma here.
    I am trying to find out the part number of the main processor used in Focusrite 2i2 and 4i4 third generation.
    They seem to be XMOS.
    I can not order them from anywhere using what is written on them.
    If anybody would be able to help identify these I would be very grateful.
    Attached Files
    Last edited by electroelef; 01-09-2023, 10:15 AM. Reason: adding picture attachement
  • прямо
    Badcaps Veteran
    • Sep 2022
    • 261
    • Indonesia

    #2
    Re: Focusrite 2i2 4i4 3rd gen

    Maybe send an email to XMOS and ask them ?

    Comment

    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30915
      • Albion

      #3
      Re: Focusrite 2i2 4i4 3rd gen

      those are bullshit numbers on the chip.
      https://www.xmos.ai/processor-catalogue/

      any company that requests that has no intention of helping anybody.

      Comment

      • electroelef
        Senior Member
        • Jun 2014
        • 57
        • United Kingdom

        #4
        Re: Focusrite 2i2 4i4 3rd gen

        Originally posted by прямо
        Maybe send an email to XMOS and ask them ?
        XMOS would not help unfortunately

        Comment

        • electroelef
          Senior Member
          • Jun 2014
          • 57
          • United Kingdom

          #5
          Re: Focusrite 2i2 4i4 3rd gen

          Originally posted by stj
          those are bullshit numbers on the chip.
          https://www.xmos.ai/processor-catalogue/

          any company that requests that has no intention of helping anybody.
          The funny thing is that I found a Chinese guy on eBay who was able to provide me with two pieces of these chips using the first line from the code: 002049
          When I asked him if he can provide the datasheet for them and/or the manufacturer part number for them he said he can not. Weird isn't it?

          Comment

          • stj
            Great Sage 齊天大聖
            • Dec 2009
            • 30915
            • Albion

            #6
            Re: Focusrite 2i2 4i4 3rd gen

            the chinese have access to the factories and dont waste anything.

            unsold stock gets dissassembled and sold as parts,
            surplus or scrap/damaged also gets sold as parts.
            on the books they are probably just listed as "disposed of"

            the best trick they have involves parts on reels or strips intended for robotic manufacture.
            you get say 5000 parts on a roll.
            the machine gets down to the last few hundred and trips an alarm,
            instead of waiting for an empty bin, you stop the machine and reload it.
            then sell the strip of a few hundred parts to a market and bill the customer for those parts anyway as "unuseable"

            Comment

            Related Topics

            Collapse

            • speggio91
              Focusrite Scarlett Solo 3rd Gen component identification
              by speggio91
              Hi everyone,

              I'm trying to repair a Focusrite Scarlett Solo 3rd Gen audio interface that was accidentally exposed to 12V on the USB-C VBUS line instead of the normal 5V. A component marked as U1 on the PCB has completely blown up together with the capacitors C17, C15.

              From the teardown video linked below, it's indicated that U1 is a voltage regulator (switcher) with 6 pins. Unfortunately, the original part on my board is so damaged that I can't make out any markings or identify it.

              Video Link: https://youtu.be/8onqBc5iTB4?si=KHtU772wsproFGZy&t=633...
              12-04-2024, 04:00 PM
            • tony359
              Focusrite Scarlett 2i2 gen1 repair
              by tony359
              Hi all,

              I have acquired a 2i2 USB sound card which came with a broken USB port. The pins were not mangled, the plastic stud was missing. I replaced it but Windows now sees something and shows a "Device Descriptor Request Failed" - which I believe it means "I see something but it's not telling me who they are"

              I found the 2i4 schematics online, I feel the digital end is identical.

              The USB goes through an USB 3343 IC which acts as interface with the host. Then it connects via ULPI protocol to the XMOS CPU, an ARM one which is connected to...
              12-18-2023, 08:20 AM
            • alltvrepairs
              Philips 55pus6754/12 FZ3A Set Option value dilemma
              by alltvrepairs
              Hi,

              I need to change the main board for this set. I have a new identical board but for a smaller model 43PUS6704/12 FZ3A

              The picture is not good and remote seems not to work either.

              The Set Option on the rear of the TV says 042 as shown in pic.
              The Service manual lists this model but with another screen with a mentioned Option Code of 109. I assume that I need to use the one on the back of the TV.

              The problem I don't know how to tackle yet is the remote issue as not responding. Remote works on another Philips TV.

              ...
              03-16-2023, 06:06 AM
            • Spork Schivago
              Capcom CPS1 Street Fighter II Turbo Hyper Fighting Champion Editon
              by Spork Schivago
              Hello!

              I am soon to be the proud owner of a Capcom CPS-1 Street Fighter II Turbo Hyper Fighting Champion Edition Coin-Operated Arcade System!

              Back in the 1980's and 1990's, there was a shop on Market Street named Faulisi's Newsstand. It could have been there before the 80's, but I was not born until March 14th of 81, so I do not know. My brother would go there with me and we would play this exact arcade. They went out of business and this arcade was sitting in a garage, wasting away.

              During middle school and high school, we'd sneak into Faulisi's and try...
              03-06-2019, 01:34 PM
            • the Benninger
              Samsung NP850xbc fault bios
              by the Benninger
              Hi folks,I have problems unzipping the file I downloaded to repair the BIOS of this notebook just nothing appears when I open only one file with 571kb 7zip or winrar
              leave you the original file and the one I managed to download from the internet, the equipment turns on randomly does not recognize the NVMe and when I bot with a pendrive after 4s the installer load is crossed

              model NP850XBC-XG1BR
              sn: 096Q9QANA00250B

              I hope you can help me solve this dilemma...
              02-05-2025, 02:49 PM
            • Loading...
            • No more items.
            Working...