Schematic for Focusrite Scarlett 2i2 3rd Gen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Momo_the_duck
    New Member
    • Sep 2025
    • 1
    • Romania
    #1

    Schematic for Focusrite Scarlett 2i2 3rd Gen

    Hello!
    New here. I just bought a broken Focusrite to begin my journey in repairing stuff.
    I would like the schematic for the Focusrite Scarlett 2i2 3rd Gen audio interface.
    Thanks in advance if anyone answers!
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • speggio91
      Focusrite Scarlett Solo 3rd Gen component identification
      by speggio91
      Hi everyone,

      I'm trying to repair a Focusrite Scarlett Solo 3rd Gen audio interface that was accidentally exposed to 12V on the USB-C VBUS line instead of the normal 5V. A component marked as U1 on the PCB has completely blown up together with the capacitors C17, C15.

      From the teardown video linked below, it's indicated that U1 is a voltage regulator (switcher) with 6 pins. Unfortunately, the original part on my board is so damaged that I can't make out any markings or identify it.

      Video Link: https://youtu.be/8onqBc5iTB4?si=KHtU772wsproFGZy&t=633...
      2 Photos
      12-04-2024, 04:00 PM
    • tony359
      Focusrite Scarlett 2i2 gen1 repair
      by tony359
      Hi all,

      I have acquired a 2i2 USB sound card which came with a broken USB port. The pins were not mangled, the plastic stud was missing. I replaced it but Windows now sees something and shows a "Device Descriptor Request Failed" - which I believe it means "I see something but it's not telling me who they are"

      I found the 2i4 schematics online, I feel the digital end is identical.

      The USB goes through an USB 3343 IC which acts as interface with the host. Then it connects via ULPI protocol to the XMOS CPU, an ARM one which is connected to...
      12-18-2023, 08:20 AM
    • TinkerTron
      Schematic vs. Reality: Where Are the Resistors on My Sharp Clock Radio? Model FY-70CH
      by TinkerTron
      Hey everyone,

      I'm currently working on a mid-70s Sharp Electronic Digital Clock Radio, Model FY-70CH. I found the service manual online, printed it out, and have been studying it for a while. My main reasons for tackling this are: (1) I want to learn electronics and figured I'd start with something I had on hand, and (2) I want to fix its issues. Right now, the radio sounds awful, has about 5V DC at the speaker terminals, and the alarm time setting doesn't work. But I'm not asking how to fix these problems.

      Instead, here's what's been bugging me so far:
      The schematic...
      3 Photos
      03-06-2025, 02:03 PM
    • atunguyd
      Acer x163w Monitor PSU schematic
      by atunguyd
      Ii wonder if anyone can help me. I have a Acer x163w monitor which is not powering up. The PSU main capacitor's one leg had completly come off - I replaced it but the PSU is still not outputting DC. I found the monitor in questions service manual here on manuals lib but the schematic in there is a completely different - the schematic shows no mosfet to drive the transformer while the one I have does use a mosfet - also the schematic shows only one optocoupler but mine has two.
      The PSU board is labelled FM-20A02-AAA made by APD as per the image below. I am trying to find a schematic for this...
      03-05-2025, 02:08 PM
    • Loading...
    • No more items.
    Working...