Trying to fix this for someone. They said water got into to it and it worked for a day then suddenly no more suction from the pump.
There isn’t any visible liquid/corrosion on the circuit board. Display works and responds to control settings, but the suction pump never turns on. The yellow connector goes to the pump
Have no idea about how this is supposed to work so looking for any advice on where to start/what to look for.
There isn’t any visible liquid/corrosion on the circuit board. Display works and responds to control settings, but the suction pump never turns on. The yellow connector goes to the pump
Have no idea about how this is supposed to work so looking for any advice on where to start/what to look for.
Comment