Can anyone identify this cable end? I need an extra one and don't know the name of it.
Attached Files
-
-
Re: Help with cable
For a soldering station ?
It looks like a GX16-6 Aviation Connector. -
Re: Help with cable
Here is one place you can some from
https://www.ebay.com/itm/1Pair-Aviat...-/401387356354Comment
-
Re: Help with cable
google 6 pin microphone connectorComment
-
Can someone identify the connectors on this cable and what it's used for?
I recognise the BNC and what looks like power.
The middle connector, is a BNC adaptor.
Thanks... -
I have a broken connector (believe it's a 6 pin mini-DIN) on a cable. The metal shroud and all but one of the pins are separated from the cable, and just stuck together for the photo. The other end is an unknown rectangular connector. The cable is for the foot pedals on an Italian made electronic piano, and the company is out of business. Looking for ideas on how to fix it. I have a soldering iron, but I'm not very skilled at soldering, so getting a retrofit for the broken end may be beyond my ability. The other end would be easier to replace, if I could get a mini-DIN cable with the same number...
-
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
Hi everyone,
My 30-pin eDP cable from the mainboard to the LCD screen got cut and damaged at the screen connector side. I found another cable and took the screen-side connector from it, but the wire colors are different. So I really need the wiring diagram for both ends of the eDP cable to solder it back properly. If anyone has the diagram, please kindly help me out. Thanks a lot... -
While at university, I connected my HP-Pavilion x360 14-dw0156ng laptop, running Windows 10, to a monitor using a provided USB-C cable. Immediately after this, my laptop's screen turned black and the device stopped working entirely. There are no signs of life such as fan noise or LED indicators, holding the power button does nothing. I've previously used this same monitor model and cable without issues, the cable typically charges the laptop as well.
I've attempted holding the power button for over 30 seconds, removing and reinserting the battery, and trying to power it on with only the...01-16-2024, 11:35 AM
Comment