Re: Air Supply Systems
I think I found it.
It is Silentaire Super Silent DR-150 Compressor
I think I found it.
It is Silentaire Super Silent DR-150 Compressor
Attached Files
-
-
Re: Air Supply Systems
Now what you could do is maybe use a vacuum pump
But you have limit your run to not more than hour at time or watch the temperature of the motor
You buy them from Harbor Freight
https://www.harborfreight.com/25-cfm...ump-98076.htmlLast edited by sam_sam_sam; 03-27-2019, 06:32 PM.Comment
-
Re: Air Supply Systems
Thank you sam
Harbor Freight their vacuum machines are too noisy, I guarantee that I will use mine longer than Harbor Freight's because I added a valve to the tube that was sealed by the original manufacturer and now I can adjust the amount of vacuum and no needs vacuum cylinder. I will let you see the photos tomorrow.
The real use of this silent vacuum pump is for my next project: Led Tv Suction Lifter, Lcd Sucker (picture 1) and BGA, SMD parts lifter.
-------------------------------------------
Harbor Freight Pittsburgh 2.5 CFM Vacuum Pump A/C
https://www.google.com/search?q=2.5+...w=1024&bih=625
TM220A table top pick and place overview
https://www.youtube.com/watch?v=yRxcYO0nuD8
at 8:05 Please listen carefully to the vacuum pumping noise over the background.Attached FilesLast edited by capwizard; 03-27-2019, 11:11 PM.Comment
-
-
Re: Air Supply Systems
Hola Samuel
Here are the pictures for you, so now I can control the flow of air. I don't need a canister because of the container of the compressor is storage.
How about the overheating problem so I will put a temperature control relay and I will change the compressor to the color white.
I have a question why all the compressors need to print black color?Attached FilesComment
-
-
Re: Air Supply Systems
to hide the welding??Comment
-
Re: Air Supply Systems
same reason for black heatsinks?Comment
-
Re: Air Supply Systems
let's rock.
Three tubes I used bubble gum to seal it.
The first white compressor in the world.
I have a question inside the compressor fill with vacuumed air or compressed air? Because I am going to use transparent plexiglass to make a square box case for it and at meantime the casing
is air storage.Attached FilesLast edited by capwizard; 03-28-2019, 11:43 AM.Comment
-
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails
I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time... -
Hi all, I just need to know that, can i use SMPS type power supply to test and short circuit detection on a laptop motherboard?
I saw 95% of repair guys are using only Linear bench power supply. linear bench power supply is pricy, thats why i planned to get one SMPS supply.
i know that in linear power supply the noise will be very low comparing to SMPS supply.... -
The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
Opened it up and discovered the power supply is making a faint clicking or ticking sound.
I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
Comment