Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!
September equipment offer (u.k.)
Collapse
X
-
-
Re: September equipment offer (u.k.)
Thanks for the link.
I've been looking around for a desoldering station, so this has come at just the right time. I see that the previous price was £84 (inc VAT). Still cheaper than Ebay & Amazon.
It gets good reviews too, so I'll be ordering one.________________________________________________
Invisible airwaves crackle with lifeBright antennae bristle with the energy________________________________________________Comment
-
Re: September equipment offer (u.k.)
Thanks for reminding me that my Maplin badged soldering station is actually a Duratool, so I can get more soldering iron tips!
Now if only I could get round to fixing the temperature buttons so I can turn the heat down!Comment
-
Re: September equipment offer (u.k.)
Pretty fast delivery too. Arrived within a few days.
I ordered the spares kit with mine. Only cost £2.40, so thought it was worth getting at the same time to save on postage.
Havent used it yet, but I've got plenty of components awaiting removal.________________________________________________
Invisible airwaves crackle with lifeBright antennae bristle with the energy________________________________________________Comment
-
Re: September equipment offer (u.k.)
If you click on the link in your first post & scroll down, it's shown in the associated products. Order code SD02162.
https://cpc.farnell.com/duratool/d00...-me-pd-mi-acce________________________________________________
Invisible airwaves crackle with lifeBright antennae bristle with the energy________________________________________________Comment
-
Re: September equipment offer (u.k.)
While we're on the subject - can anyone recommend a hot air station?
Duratool have one big unit that's an iron and hot air, or they have a separate hot air station, or other brands? Cheaper is better, but not chinese enough to cause a 240v mains short and explode like the last one! Comments welcome before I make a mistake!
Comment
Related Topics
Collapse
-
by BOSCHNJAKABOUT ME INTRODUCTION FILE
2024 BEV, BIH, SARAJEVO START PROJECT: ELECTRIC VEHICLE TOYOTA 4 RUNNER CONVERSION http://www.bev.ba/TOYOTA4RUNNER/index.html
2023 BEV, BIH, SARAJEVO START PROJECT: SECRETS AND MANUFACTURING PLANS (AS MY REPLICA) OF THE LIBERTY ENGINE 2.0.
2022 BEV, PROJECT ?
2021 BEV, PROJECT ?
2020 BEV,BiH, Sarajevo: PROJECT IS: HOW TO SWITCH OFF PERMANENT MAGNET FIELD and HOW TO SWITCH ON PERMANENT MAGNET FIELD?
2019 BEV, Croatia, Ston:, Broce: PROJECT - PROJEKT ELEKTRIČNI GLISER http://www.bev.ba/ELEKTRICNIVANBRODSKIMOTOR/indexHR.htm...-
Channel: Visitor Messages
12-28-2023, 02:09 PM -
-
by Roman555I'd like to offer an Acer IPIMB-AR Rev: 1.02A fullflash BIOS (cleaned ME region). The model is for Acer Predator G5920.
It is a model that is based on Intel Z77 PCH and doesn't have on-board graphics and video connectors.
I suppose it doesn't have any restriction about discrete graphics cards (I mean they don't have to be in a whitelist).
Please don't mistake this mainboard with a similar model with on-board graphics and based on Intel B75 PCH.
Jumper FLASH_OVERRIDE
default position: 1-2 - BIOS area protected
position 2-3 allows to dump BIOS or write...-
Channel: BIOS & Schematic Requests!
06-26-2025, 05:15 AM -
-
I've just been repairing some (very) old speakers with a loud hum that occurred as soon as you powered them on regardless if any actual audio is played through them. I work in a School so it's 99% likey that the Teachers have hardly ever turned the power off on them for well over 10+ years.
As you can see the top large capacitor on the right has a bulge on the top so defincately needs replacing. As the one next to it is exactly the same capacity and voltage I planned to replace them both.
What is your advice/opinion on whether or not on old(er)...-
Channel: General Capacitor Questions & Issues
-
-
by tony359Hi all,
I have an old Apple II monitor to restore and I do have a big variac. I've always wondered whether a variac is a good idea to power on equipment which has been unpowered for (likely) decades?
When it comes to analogue stuff, I suppose it's ok and I'm probably going to see the device slowly coming back to life with a lower voltage applied.
But I suppose this won't work for devices with digital components in it as they won't work unless the proper voltages are applied?
In case of an old monitor, it is safe/good for the monitor to...10-13-2023, 02:47 AM -
by dreamlayersI bought used Logitech Z-10 computer speakers. They can act as a USB audio device or accept line input, and they have a headphone output jack. Some music didn't sound right, so I played a frequency sweep and heard other frequencies and beat frequencies between them and the sweep. I uploaded a spectrogram of a frequency sweep. From the very start, some but not all odd harmonics are visible, indicating symmetric distortion. Then at higher frequencies there are descending images of those harmonics, indicating non-linearity and constant higher frequency noise mixing with the harmonics. The image of...2 Photos
-
Channel: Troubleshooting Audio Equipment
05-22-2025, 11:41 AM -
- Loading...
- No more items.
Comment