BGA Inspection???

[radcliffkaty1]

Hello Everyone!!!

Is there anyone who can help me in finding the best method for Inspection of BGAs???

Thanks in advance.

[stj]

Re: BGA Inspection???

xray machine.

[budm]

Re: BGA Inspection???

https://cdn.badcaps-static.com/pdfs/...a88e50bb0d.pdf
https://cdn.badcaps-static.com/pdfs/...b6121f8018.pdf

[radcliffkaty1]

Re: BGA Inspection???

xray machine.

Thanks, stj!!!

But, isn't it costly for an individual. Because I also found one method for x-ray inspection service. So, can you please help me to review this BGA X-ray Inspection Service provider if you have any idea about this. I'll be happy if you shares your reviews on this or any other Inspection service to which which you are familiar with.

[stj]

Re: BGA Inspection???

yes, it's costly and dangerous - that wasnt your question.

i dont know if your a hobbyist or a director of a big repair company.

[radcliffkaty1]

Re: BGA Inspection???

yes, it's costly and dangerous - that wasnt your question.

i dont know if your a hobbyist or a director of a big repair company.

Yes, that's not my question. At that time, I was thinking to inspect BGA manually, but I found it difficult and then someone suggests me to take services from an external service provider. So, that's why I asked you to review it. I hope you got my point, what I want to say.

And thanks for being here, to help us.

[sam_sam_sam]

Re: BGA Inspection???

I was thinking to inspect BGA manually, but I found it difficult and then someone suggests me to take services from an external service provider. So, that's why I asked you to review it.

I do not have any experience with this type of service so let get this out the way first

I did look at the service provider that you listed in your post earlier

From what I read on there web site I would not have a problem giving them a try

One recommendation I would make is this

If you are mass producing this item

I would do the following if I were doing this

I would send a blank board and see what they would recommend

If you are wanting them to repair a finished product I would send it to them and see what they recommend

What I like about there website is that you have all their contact information
and do not have to go looking for it

This is not say how good there service however I do not think that a company would put all their information on how to get in touched with them if they were a fly by company

This is my thoughts on what you were asking about

I have to find vendors for the company I work for and I use this critical and other factors when selecting a company to buy from or get service from

I hope this helps

[radcliffkaty1]

Re: BGA Inspection???

I do not have any experience with this type of service so let get this out the way first

I did look at the service provider that you listed in your post earlier

From what I read on there web site I would not have a problem giving them a try

One recommendation I would make is this

If you are mass producing this item

I would do the following if I were doing this

I would send a blank board and see what they would recommend

If you are wanting them to repair a finished product I would send it to them and see what they recommend

What I like about there website is that you have all their contact information
and do not have to go looking for it

This is not say how good there service however I do not think that a company would put all their information on how to get in touched with them if they were a fly by company

This is my thoughts on what you were asking about

I have to find vendors for the company I work for and I use this critical and other factors when selecting a company to buy from or get service from

I hope this helps

Thanks for the help and sharing your valuable time with me.