Recently purchased 10 RJH30E2 IGBTs from china. I go to measure them and none measure properly in diode mode + on C - on E then touch G with + while leaving - on E I still read OL
In about 4 of them I measure the protection diode from C to E
Are all of them bad or do they need more of a bias voltage that my meter doesn’t provide? It uses a 9v battery
Here’s the datasheet for the IGBT: https://www.scribd.com/mobile/docume...709293/RJH30E2
In about 4 of them I measure the protection diode from C to E
Are all of them bad or do they need more of a bias voltage that my meter doesn’t provide? It uses a 9v battery
Here’s the datasheet for the IGBT: https://www.scribd.com/mobile/docume...709293/RJH30E2
Comment