Announcement

Collapse
No announcement yet.

Resistor rating

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Resistor rating

    Having a little trouble finding the rating for this shorted resistor. The 5 bands are such: Black, Blue,Silver,Gold,Green
    Attached Files

    #2
    Re: Resistor rating

    Could it be green,blue,silver ? that would be 0.56 ohm, your resistor is fine its not shorted its just a low value

    0.6 ohm 5% temp coef 20
    Attached Files
    Last edited by R_J; 10-18-2016, 12:16 PM.

    Comment


      #3
      Re: Resistor rating

      Nope. it could be Green,Gold,Silver,Blue Black

      Comment


        #4
        Re: Resistor rating

        Black = 0
        Blue = 6
        Silver = X0.01 or 10% tolerance (it has no numeric value)
        gold = X0.1 or 5% tolerance (no numeric value)
        green = 5 or .5% tolerance or if the 5th band 20 tep coef.

        Are you sure its a resistor and not an inductor (coil)?
        Last edited by R_J; 10-18-2016, 12:38 PM.

        Comment


          #5
          Re: Resistor rating

          Ok, then it must be ok and not shorted like I thought.
          Thanks!

          Comment


            #6
            Re: Resistor rating

            FYI: resistor usually goes open circuit, not shorted out especially the MOX type like you have. That resistor is connected the Source pin of the MOSFET?
            What are you fixing any way?
            Never stop learning
            Basic LCD TV and Monitor troubleshooting guides.
            http://www.badcaps.net/forum/showthr...956#post305956

            Voltage Regulator (LDO) testing:
            http://www.badcaps.net/forum/showthr...999#post300999

            Inverter testing using old CFL:
            http://www.badcaps.net/forum/showthr...er+testing+cfl

            Tear down pictures : Hit the ">" Show Albums and stories" on the left side
            http://s807.photobucket.com/user/budm/library/

            TV Factory reset codes listing:
            http://www.badcaps.net/forum/showthread.php?t=24809

            Comment


              #7
              Re: Resistor rating

              I hope this doesn't turn into a "what color is that dress" thread. Fortunately only EE's and technicians would be interested.

              There are a lot of rules on resistor bands to help against reading wrong.

              1. The first band is never black. The guides may hint at black possibly could be first, but it is never black => if it is black, this is the last band instead of first.
              2. Second band is never metallic.
              3. If third band is metallic, that's a multiplier and not a significant figure

              Inductor significands should not be metallic either!

              So this should be:
              green (yeah it looks like very poor green)-blue-silver-gold-green

              56 as significand is a "E12 standard value" for 10% or better resistors so this is another check.

              Despite this all I can get from the bands is that it's a 0.56 ohms 5% Flameproof and I don't know what the green is (probably temp coefficient)


              So I have more resistors, what are the values of these resistors?

              My guesses (select to see them...):

              0.1Ω 5% 1W CC (blue band = ?)
              1.0Ω 5% 1W CC
              0.12Ω 5% 1W FP
              2.7Ω 5% 1W FP
              4.7Ω 5% 1W CC

              0.47Ω 5% ¼W FP (white band = ?)
              0.2Ω 5% 1W FP (note: first significand might be brown...)
              3.3Ω 10% ½W CC
              5.6Ω 5% ½W FP
              1.5Ω 5% ½W ?FP


              CC=carbon composite (catch on fire or smoke when overloaded)
              FP=flameproof (opens up without fire)
              Attached Files

              Comment

              Working...
              X