FCC ID database - Error 522

Collapse
X
 
  • Time
  • Show
Clear All
new posts

Related Topics

Collapse

  • Sus256
    HISENSE 65E7KQ PRO - no boot
    by Sus256
    Hi all!

    HISENSE 65E7KQ PRO
    RSAG7.820.13512 - chassis
    MT9618BAATAB - cpu
    RSAG7.820.12059 - power
    HD650Y3U77 - panel
    KLM8G1GETF - emmc

    The TV does not turn on, the standby indicator is on. All voltages are present.
    Emms is dead. Not readable, not detected.
    Replaced emmc.
    But with another dump there is no launch

    Terminal log

    UART
    <
    AC_ON
    RPMB key is not yet programmed

    HASH1_VERSION=0x00000000 64bit
    E-B
    FDE enabled
    layout pattern onebin by SAR7,0...
    06-01-2025, 02:11 AM
  • Maalobs
    Philips 60PFL8708S/12 - QFU1.2E LA - Error code 53
    by Maalobs
    Hi,

    I have a 2014 vintage Philips 60PFL8708S/12 that suddenly died in the middle of the kids watching a show.

    The relevant service manual for the chassis is available here.
    The TV no longer powers on, and leaving it powered on for a few minutes results in the layer-1 error with 2 blinks.
    When I short the SDM to ground I get the layer-2 error code 53.

    The inside of the TV has no damaged components and no swollen capacitors.
    In SDM-mode when all the power rails are left on despite entering the protection mode, I tracked down and measured...
    04-02-2019, 01:15 PM
  • medinfo
    Mac T2 after update(There was an error activating your device)
    by medinfo
    Macbook Pro 2019 T2
    iCloud OFF
    MDM unlocked by changing Serial Number
    worked fine but after latest update see (There was an error activating your device. Please try again).
    Erased and boot in internet recovery, same error.
    changed to original serial number (iCloud OFF & MDM ON), same error.
    tested with others serial number, same error.
    tested (CMD+R), (Option+CMD+R), (Shift+Option+CMD+R), same error
    Revived and restored by Apple Configurator and same error.

    Any help ?
    12-31-2023, 02:04 PM
  • rmjimenez455@gmail.com
    Sumsour station 8586D error H-E
    by rmjimenez455@gmail.com
    Hello everyone, next I have the following problem with the Sumsour 8586D 110v dual station I bought it a year ago and it worked wonderfully, now it presents the H-E error on the soldering iron side, the hot air side works correctly..... I disassembled the soldering iron head because the manual tells me that this error is due to ceramic resistance problems, in effect, I measured it and it is open, I bought a new one that is working verified in a soldering iron and nothing.... The same error continues, I proceeded to open the station and check visually, I found a totally damaged 1R00 surface mount...
    09-07-2024, 09:33 AM
  • Dannyx
    Hilti PD30 Laser Range meter Error 276
    by Dannyx
    Good day folks.....wow, seems like forever since I posted anything here Still alive and well, thank you I guess you could say I've become more independent and able to work stuff out on my own. This one though goes way over my head and I doubt is fixable, but maybe some bright spark out there has an equally bright idea.

    So: my Hilti PD30 laser meter quit on me just the other day. It was working fine, I set it down for a while and when I tried using it again it gave me an E276 and wouldn't do anything else. I tried taking out the batteries, all that standard stuff but nothing...
    07-30-2023, 05:05 AM
  • Loading...
  • No more items.
Working...