Finding correct cable connector replacement

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Sadistic Taste
    Senior Member
    • Mar 2014
    • 72
    • UK

    #1

    Finding correct cable connector replacement

    Ok so I did something silly, I broken off a keyboard ribbon cable connector. I'm wondering if anyone can help me figure out how/where I can find the correct replacement.

    It's a asus x502c

    Thanks in advance.
  • diif
    Badcaps Legend
    • Feb 2014
    • 6978
    • England

    #2
    Re: Finding correct cable connector replacement

    Has the whole thing broken off or just the clip ? Can we see a photo ?
    I've swapped a keyboard connector of a scrap board before using hot air.

    Comment

    • Sadistic Taste
      Senior Member
      • Mar 2014
      • 72
      • UK

      #3
      Re: Finding correct cable connector replacement

      I'm not home atm, but I'll upload a pic later. It's just the brown clip that's came away, but I damaged it more trying to get it back in place.

      I was hoping I might be able to source a replacememt, rather then having to buy a scrap board.

      I have it pushed in atm, with the cable in place, but some keys are working. I'm going to try a peace of card or something on top of the cable when I get home.

      Comment

      • diif
        Badcaps Legend
        • Feb 2014
        • 6978
        • England

        #4
        Re: Finding correct cable connector replacement

        Depending on the type of clip, i have "fixed" the cable in by using a small piece of plastic as a shim to wedge in the cable.
        I have a few scrap boards, if i have a suitable connector i'll stick it in the post to you.
        Last edited by diif; 01-13-2015, 09:54 AM.

        Comment

        • Sadistic Taste
          Senior Member
          • Mar 2014
          • 72
          • UK

          #5
          Re: Finding correct cable connector replacement

          That would be great. Here is a pic of it.
          Attached Files

          Comment

          • diif
            Badcaps Legend
            • Feb 2014
            • 6978
            • England

            #6
            Re: Finding correct cable connector replacement

            Sorry, the only one i have in that style is 25 pin, but they are called FFC connectors and depending on the pitch can be bought from ebay or Mouser etc.
            Maybe this one depending on the pitch ?
            http://www.ebay.co.uk/itm/MOLEX-5289...-/350819433535
            Last edited by diif; 01-13-2015, 05:58 PM.

            Comment

            • Sadistic Taste
              Senior Member
              • Mar 2014
              • 72
              • UK

              #7
              Re: Finding correct cable connector replacement

              Yeah that looks the same. Silly question, is the pitch the space between the leads that are soldered? So I just need to measer the spacing?

              Comment

              • diif
                Badcaps Legend
                • Feb 2014
                • 6978
                • England

                #8
                Re: Finding correct cable connector replacement

                The pitch is centre of the lead to the centre of the next.

                Comment

                • Sadistic Taste
                  Senior Member
                  • Mar 2014
                  • 72
                  • UK

                  #9
                  Re: Finding correct cable connector replacement

                  Ok thank you, the pitch on mine is 1mm. The only ones on eBay close to mine are drawer type, instead of the flip. Mouser have them though, which I'd never heard of before, so thank you for your help diff.

                  Comment

                  • diif
                    Badcaps Legend
                    • Feb 2014
                    • 6978
                    • England

                    #10
                    Re: Finding correct cable connector replacement

                    You're welcome, glad you managed to locate.

                    Comment

                    Related Topics

                    Collapse

                    • myth77
                      alienware connector replacement
                      by myth77
                      I have Alienware m15 R2 Compal EDQ51 LA-H351P with one of those connectors to a usb/power bords damaged behind repair (many pins missing...)
                      I was looking on ebay and Ali and they are very expensive but i found that dell precision 7530.7540.... laptops have maybe the same connector but i am not sure...So anyone tried this replacement before?

                      First link is to a connector original for alienware and second link is from dell precision laptops.

                      https://www.ebay.com/itm/15565280194...dx0JPhZbnPYfBf...
                      08-20-2023, 03:12 AM
                    • mon2
                      A1466 Macbook Air (Liquid damage repair)
                      by mon2
                      Hi. Recently serviced a damaged A1466 Macbook Air. Thought to post the issues and resolution for each.

                      Macbook AIR Model A1466 Diagnostic 09-01-2021

                      Issue: Liquid damaged (beer spill) Macbook AIR will not power up.


                      Problems & Resolutions

                      1) Attached Apple magsafe power adapter. No green / no orange light. This confirms the absence of the PP3V42_G3H voltage rail. The PP3V42_G3H rail is the primary voltage rail necessary to communicate with the magsafe power adapter to report the green or orange light status to the end user....
                      09-01-2021, 09:31 AM
                    • bussincaps
                      MacBook Pro Mid-2014 A1398 Retina LED Controller Connector [First Repair (Disaster)]
                      by bussincaps
                      Hello All,

                      tl;dr: minimal electronics experience and my first repair, lifted 8 pads off the laptop display LED controller board when attempting a connector replacement, options are attempting pad repair or jump wiring.

                      Laptop Model: MacBook Pro 15 Mid-2014 Retina, A1398 MGXA2LL/A
                      eDP Display: Samsung LSN154YL01-A02, assembly sold as Apple part 661-8310
                      Soldering Equipment: Hakko FX-888D w/ T-18 tips (Chisel, Conical, Bevel types)

                      I needed to replace the 30-pin I-PEX Cabline connector (labeled J8300 in the Apple 820-3662 mainboard schematics),...
                      08-03-2023, 12:57 PM
                    • jojo88
                      LG LED (LCD) TV 50LN5600-UI flashes logo, red LED 3x blink
                      by jojo88
                      This 50 inch LG LED (LCD) TV was given to me not working. Powering it on, the logo flashes once for 1/4 second then black. Front panel red LED blinks 3x (I think... see below) then the LED turns off. TV stays on until I press the Power button again. There is an image on the LCD panel--I press the "Settings" button on the TV and this brings up menus I can see with a flashlight / torch.

                      (The front panel red error code LED blink sequence is a bit confusing to me. The LED is on when the TV is off. I press the Power button and the LED *very briefly* goes off--maybe 1/10 second--then...
                      03-29-2023, 11:20 AM
                    • ntec
                      Ribbon flex connector replacement
                      by ntec
                      I am trying to fix a tablet that someone botched the ffc/fpc connector on as circled in the picture. When buying a replacement connector I see the connectors are categorized by number of pins and pitch but how do I determine what mine is to find an exact replacement. Not sure if it means anything, but beside the connector it has written a number 1 on one side and 51 on the other side which is also written on the ribbon flex...
                      10-29-2020, 10:38 AM
                    • Loading...
                    • No more items.
                    Working...