where to find soldering services?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Logistics
    Badcaps Veteran
    • Apr 2007
    • 721
    • USA

    #1

    where to find soldering services?

    I was thinking of goofing with some pieces of hardware I have; replacing some of the memory ic's with upgraded ones, but they are SOJ, and I don't trust myself to try this. Any idea where I can go to have the work done? Even online?

    I'm in San Jose, CA btw.
    Presonus Audiobox USB, Schiit Magni 3, Sony MDR-V700
  • Anndy
    Member
    • Aug 2012
    • 10
    • USA

    #2
    Re: where to find soldering services?

    Well, any electronic repair shop should have electronics techs who would
    know how to do such a thing. Other than that, some electronic stores also
    offer such services (and just to be clear, by electronic stores I'm referring to stores who sell equipment for working with electronics, as in soldering irons, capacitors, resistors and the like)

    Comment

    • twbranch
      Mad Nerd
      • Oct 2012
      • 153
      • USA

      #3
      Re: where to find soldering services?

      PM you can send them to me! I live in NC though!

      Comment

      Related Topics

      Collapse

      • Vesko356
        [Guide] How to find the right HP bios version to flash
        by Vesko356
        First of all thanks to all of our members who have posted previously all methods posted here.
        Please leave a comment if you find something new,or have anything else to add.
        -----------------------------------------------------------------------------------------

        Find by serial number,model number or series

        If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
        Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
        Operating system and OS version.If...
        08-11-2023, 03:27 AM
      • corrize
        Where to find a very small fpc connector 0.3mm between 2 pins ?
        by corrize
        Hello, I search this connector (oxydated).
        It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
        I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
        I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?


        Do you know how to find this connector please ? What is the exact name for find it ?

        ​...
        08-06-2024, 05:25 PM
      • sam_sam_sam
        Where can I find a DD3 128000 type memory but 32 MGB in one module because this laptop has only one slot
        by sam_sam_sam
        This Dell computer is a pain in the a** because of it only has one memory slot this computer only had 4 megabytes of memory and slower than shit I found a 8 megabyte memory module and it is better but still slow as shit the maximum is 32 megabytes of RAM but I was not able to find one I found some that are 16 megabytes but they are 1600/128000 type and I am not sure if this computer will work with this type of memory or not

        Dose anyone knows where I can find a 32 megabytes memory module for this computer because the battery still works fairly well still I would like to use it on my...
        07-07-2024, 02:34 PM
      • Peter_1402
        Yihua 992DA+ Hot air gun and soldering rework station, burnt mark
        by Peter_1402
        Hi Everyone,
        I bought a Yihua 992DA+ hot air gun and soldering iron unit from a used market.
        1. Soldering iron works great
        2. There is a burnt mark on the hot air gun handle.
        I am a bit concern by the look of the melted plastic. I opened the hot air gun handle and took some readings with a multimeter.
        Heating element ~ 75ohm. (Similar reading taken from a spare heating element that came with the unit.)
        Thermocouple ~ 1.5ohm. (Similar reading from the spare heating element.)
        Reed switch tested ok with a magnet.
        From the above test, I can conclude...
        07-12-2025, 11:50 AM
      • temyth
        Sentey ATX PSU - ERP650-PS - Trying to find out the right Standby IC
        by temyth
        Greetings! I have this ERP650-PS atx power supply, it is a relatively simple psu, the primary has a driver IC that controls the two main mosfets (two 20n60S5), together with a Classic Standby circuit with a PWM IC (not a FET like the VIper22A) , relatively similar to the SDC606P.

        The whole point is that I got this power supply years ago when I had no knowledge, apparently the PWM IC was burned because someone turned the power supply on with the switch at 110v in a 220v network (classic error). Important detail: the power supply at the time came without the primary capacitors.
        ...
        01-07-2024, 04:50 PM
      • Loading...
      • No more items.
      Working...