shopjimmy.com or www.retechtv.com i am looking to buy a z sus board. i have no idea which is more reliable on the parts.
Where would you buy the part
Collapse
X
-
Re: Where would you buy the part
I bought an inverter board from shopjimmy, it came in 2 days and was packed very well.
They bow the inverter board to make it fit in the secondary box, which is a NO NO! But they were lucky the board work fine.
Just make sure the numbers match and the picture looks like yours. -
Re: Where would you buy the part
You should just have the Y or Z boards re-chipped.
There are several good companies that do this.
Most are less than 100.00 per board. The older single ipm boards are even cheaper.
These boards are only good for about 2500 hours. Used boards are a gamble.
New boards may even be updated and not just swapped ipms out with new ones.Last edited by cadiman; 04-24-2012, 05:35 PM.Comment
Related Topics
Collapse
-
by m1ch43lzmHi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by CvradoHello my friends!
I have a question that I think you can answer and help me with!
I have a faulty main board from an led TV. And I found the same part number board and design but is from a 43" TV and I want to use it on a 65". On its stickers , all are the same except the wattage for the LEDs backlight, both state different watts and LED Voltages!
So I presume that the backlight inverter section from the replacement board has lower wattage then the original one, am I right?
My concern is that the board won't draw enough voltage to the bac... -
by PizzaManI am trying to find this part on the logic board. See pictures below. It might be CR812, not sure. Any help would be appreciated. And where could I find the part?3 Photos
-
by HakuuHi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... - Loading...
- No more items.
Comment