Doublesided Tape for LED Backlight Strips

URL

Member

Join Date: Mar 2019

Posts: 10

Country: UK
#1

Doublesided Tape for LED Backlight Strips

09-05-2021, 07:38 AM

Guys

I need to buy more double sided tape for LED backlights and I cannot find the 3M part number I previously purchased.

Can anyone suggest a suitable 3M product that withstands the temperatures of the LED backlight strips?

Thanks
Tags: None
diif

Badcaps Legend

Join Date: Feb 2014

Posts: 6978

Country: England
#2

09-05-2021, 07:42 AM

Re: Doublesided Tape for LED Backlight Strips

You want this stuff, available from many sellers on Ali. https://www.aliexpress.com/item/1005002799195416.html far cheaper than genuine 3M tape.
Comment
URL

Member

Join Date: Mar 2019

Posts: 10

Country: UK
#3

09-05-2021, 08:06 AM

Re: Doublesided Tape for LED Backlight Strips

Excellent, thanks - just ordered some.
Comment

Previous template Next

A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair

by howardc64

Problem

This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
- Channel: Troubleshooting Computer Displays
08-04-2024, 10:36 PM
Hisense 55AS6G screen double sided tape required

by alltvrepairs

Hi,
I need to replace the LEDs of this TV. The screen is glued with double sided tape. This video shows the proceudre required.

I need a source for this type of double sided tape adhesive please.
https://www.youtube.com/watch?v=bN6g...nel=QUADRA-NET

Tks!
- Channel: Troubleshooting TVs and Video Sources
07-17-2025, 09:32 AM
Backlight strip quality, Amazon vs Ebay vs ShopJimmy. Is there really a difference?

by DXseekerMO

Hello everyone!

Recently I've noticed that some ShopJimmy backlight strips don't have double-sided tape installed upon them when an application calls for it, and I must purchase the tape separately. In a recent chat conversation with a customer service agent I told them if this tape wasn't applied when it was called for I would begin to consider ordering my backlight strips elsewhere. It looks like this time may have come.

I recently got a TCL 65S4 with bad backlights. After looking at the SJ listing here: https://www.shopjimmy.com/tcl-jl-d65...365as-m-led-ba...

Yes

0%

1 vote

All backlight strips are the same quality

0%

1 vote

No

0%

0 votes
- Channel: Troubleshooting TVs and Video Sources
12-16-2021, 03:58 PM
Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel

by howardc64

Failure Symptom

No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

Where is the short?

Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.

Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
- Channel: Troubleshooting TVs and Video Sources
05-27-2025, 02:56 PM
Guide me through repairing a Dell p2210f LCD ccfl backlight monitor

by DanPoka

I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
- Channel: Troubleshooting Computer Displays
02-15-2025, 05:05 AM
Loading...
No more items.

Doublesided Tape for LED Backlight Strips

Doublesided Tape for LED Backlight Strips

Comment

Comment

Related Topics