Tools / technique for boards with eMMC repair?

[CapLeaker]

Re: Tools / technique for boards with eMMC repair?

This vid is interesting, how he flashed the eMMC on board.
https://www.youtube.com/watch?v=Ff4S9Z2phIE

[CapLeaker]

Re: Tools / technique for boards with eMMC repair?

It is possible to flash the EMMC with the programmer off the board and then solder the flashed EMMC to the board. I proved that. No problems.

[megaraider]

Re: Tools / technique for boards with eMMC repair?

It is possible to flash the EMMC with the programmer off the board and then solder the flashed EMMC to the board. I proved that. No problems.

Next step will be to read (and write if needed) without removing the eMMC from the board (ISP)...

[CapLeaker]

Re: Tools / technique for boards with eMMC repair?

Next step will be to read (and write if needed) without removing the eMMC from the board (ISP)...

I am not sure if you did read this thread: https://www.badcaps.net/forum/showthread.php?t=74150

As long as the EMMC itself is good, I can read and write from and to it without taking it off the board. That is, IF one knows where to hook up the wires to. I have already proofed that in that thread above.

[megaraider]

Re: Tools / technique for boards with eMMC repair?

I am not sure if you did read this thread: https://www.badcaps.net/forum/showthread.php?t=74150
I can read and write from and to it without taking it off the board.

I hadn't read that thread earlier.
Then it's done: you've proved it to be possible in both ways