Stinger Helping hand

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 1supertech
    Badcaps Veteran
    • Apr 2012
    • 384
    • USA
    #1

    Stinger Helping hand

    Hello folks
    I just bought a new toy to help solder chips on boards with out getting my fat fingers in the way
    Stinger helping hand tools is an addition to Panavise board holder
    https://www.youtube.com/watch?v=m5rn_Q84z1w
    Attached Files
    Tags: None
    • RJARRRPCGP
      Badcaps Legend
      • Jul 2004
      • 6304
      • USA
      #2
      Re: Stinger Helping hand

      I thought it was a bug killer at first with the title! LOL!
      ASRock B550 PG Velocita

      Ryzen 9 "Vermeer" 5900X

      32 GB G.Skill RipJaws V F4-3200C16D-32GVR

      Arc A770 16 GB

      eVGA Supernova G3 750W

      Western Digital Black SN850 1TB NVMe SSD

      Alienware AW3423DWF OLED




      "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

      "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

      "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

      "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

        Comment

        • Comm
          New Member
          • Nov 2014
          • 8
          • USA
          #3
          Re: Stinger Helping hand

          Ok, that is pretty cool...congrats, didn't even know they existed

            Comment

            • Life Goes On
              Badcaps Veteran
              • May 2014
              • 264
              • Curacao
              #4
              Re: Stinger Helping hand

              that is a beautiful thing
              The Night Drop Down, I Will Keep Try Until..., You Never know.
              Dushi Kòrsou, Nos Tei.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • H1ghl4nd3r
                  Synology DS415+ Cr1220 holder problem
                  by H1ghl4nd3r
                  I bought a Synology DS415+ online non working and when I plugged a new power supply in and held the power button for a few seconds the machine began booting up.
                  After a few minutes later the blue light is still flashing, so I shut it down and opened it up to get to the motherboard as I was going to do the solder fix for the bios clock, but I quickly realised it had already been done (poorly) but even worse was when I realised the bios cr1220 battery and holder was not on the motherboard and wasn’t in the case.

                  I have attached 6 pictures, picture 1 & 2 is of new motherboard...
                  04-03-2023, 08:13 AM
                • Simonc123
                  CH341A bios chip wont fit 1.8v adaptor holder
                  by Simonc123
                  Hi guys, I need a bit of help. I use a CH341A programmer, which is fine for 3.3v old-style bios chips. I need to reprogram some 1.8v chips, which are QFN type chips. I have the 1.8v adaptor for that slots onto the programmer, which does step the voltage down to 1.8v, but as you can see in the picture added, it doesn't fit in the IC holder.

                  Please see the 4th picture that shows what looks like what should work for the QFN IC (highlighted in red). The issue is that the 8 pads on the programmer are too long and short out the IC. Is it a case of putting kapton tape over the center ground...
                  4 Photos
                  03-09-2025, 08:54 AM
                • Kemer
                  CMOS battery holder solder pad trace
                  by Kemer
                  Hi,
                  I will add a photo of HP 15 laptop mainboard. The positive side of CMOS battery holder solder pad has been broken. What I want to ask is, the trace of positive pole. If you look at the photo, you will notice red color "A" and "B" letters for two different shades of blue.

                  Anybody help?...
                  12-20-2024, 02:41 PM
                • Gjackson
                  SMEG induction cooker error EA on both left hand side cooktops
                  by Gjackson
                  Hi all,

                  I have a SMEG cooktop with a EGO 72.08041.002 power board. The two left hand side cooktops started to slowly fail, sometimes stopping with an EA error (Power board failure according to the manual) after a couple minutes boiling some water and eventually they completely failed and now get an EA error on both of them at all times. Visual inspection of the board went over ok, I checked the IGBT's and rectifiers and they seem fine, what should I look at next as this is the first time I'm fixing an induction cooker, I'm suspecting capacitors in this case, Which ones should I look...
                  07-09-2024, 01:46 PM
                • howardc64
                  A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                  by howardc64
                  Problem

                  This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                  08-04-2024, 10:36 PM
                • Loading...
                • No more items.
                Working...