LCD TV PCB Contact pad Repair ?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • manstoblame
    Senior Member
    • Jan 2011
    • 85

    #1

    LCD TV PCB Contact pad Repair ?

    Good day all BCN members not sure if this is where to post this question if not I'm sure they will let me know. Here goes, I have this main/logic board that has a pad destroyed and I want to know if its possible to repair. Not trying to buy a new one but attempting to fix this one. Copper pad is gone so there is nothing to solder to and because this is a dual layered pcb not certain if there are inner traces.

    Anyone here know of how to do this or know anything that'll help instead of getting a new board I love to tinker so I'll try anything sensible here are a few pictures

    Yes the last image looks mangled I know it hadn't been cleaned yet sorry!!
    Attached Files
  • dellxps15
    Badcaps Legend
    • Feb 2014
    • 1588
    • italy

    #2
    Re: LCD TV PCB Contact pad Repair ?

    wait a sunny day and make better picture from what i can see for now cant say anything with that quality picture.

    so for me wait a sunny day, and make some full picture + some macros on that zone.

    Comment

    • manstoblame
      Senior Member
      • Jan 2011
      • 85

      #3
      Re: LCD TV PCB Contact pad Repair ?

      Originally posted by dellxps15
      wait a sunny day and make better picture from what i can see for now cant say anything with that quality picture.

      so for me wait a sunny day, and make some full picture + some macros on that zone.

      Ok Sunny Day pictures Dellxps15 hope it shows a bit better cannot get closer or clearer than this have cell phone camera
      Attached Files

      Comment

      • manstoblame
        Senior Member
        • Jan 2011
        • 85

        #4
        Re: LCD TV PCB Contact pad Repair ?

        Oh by the way there is another post with full board pictures in my post Akai/Ilo LCD TV Problems posted in the Audio and TV forum

        Comment

        • dellxps15
          Badcaps Legend
          • Feb 2014
          • 1588
          • italy

          #5
          Re: LCD TV PCB Contact pad Repair ?

          for me you can just try to solder it back using a 63-37 and 2% flux core tin. just keep it a bit on it till it get attached to the board.

          Comment

          Related Topics

          Collapse

          Working...