Hi,
We continue to struggle with the SEF 551.10 reflow oven. After we managed to start it in october - the topic here -> https://www.badcaps.net/forum/troubl...he-reflow-oven everything promised to be good. But...
While soldering with lead paste somehow goes, but we cannot force the stove to raise the temperature
that he would dissolve the unleaded binder. I even doubted what this bastard shows on screen and passed through it a thermocouple connected to an external meter. The maximum temperature that was obtained is 190°C.
Maybe someone used such a stove and could share their knowledge of what we can do wrong?
I will add that the device shows nothing, what could suggest that a heater or fan does not work.
I have some suspicions related to the configuration file that loads into the furnace with the software. We got it with files from the manufacturer when there was a problem with starting (see link above). But we are not sure if it is a good configuration for this stove,
or just a general configuration file.
We wrote e-mail to the manufacturer in this matter and we are waiting for answer. But maybe someone has knowledge about this? Configuration file is in the attachment.
We continue to struggle with the SEF 551.10 reflow oven. After we managed to start it in october - the topic here -> https://www.badcaps.net/forum/troubl...he-reflow-oven everything promised to be good. But...
While soldering with lead paste somehow goes, but we cannot force the stove to raise the temperature
that he would dissolve the unleaded binder. I even doubted what this bastard shows on screen and passed through it a thermocouple connected to an external meter. The maximum temperature that was obtained is 190°C.
Maybe someone used such a stove and could share their knowledge of what we can do wrong?
I will add that the device shows nothing, what could suggest that a heater or fan does not work.
I have some suspicions related to the configuration file that loads into the furnace with the software. We got it with files from the manufacturer when there was a problem with starting (see link above). But we are not sure if it is a good configuration for this stove,
or just a general configuration file.
We wrote e-mail to the manufacturer in this matter and we are waiting for answer. But maybe someone has knowledge about this? Configuration file is in the attachment.
It's cold here at times in Canada, but not that cold!
Easy solution is to go to AcuRite website and purchase the sensor. Right?...
Hello.
