Announcement

Collapse
No announcement yet.

Tenma 72-6800 opinions

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Tenma 72-6800 opinions

    Whats the opinion of this scope?

    Fairly new to electronics and learning, mostly repair TV's in spare time as and when they come up either free or cheap!

    Any advice or recommendations?

    Will see if he will accept £50 for it.
    Tags: None
    #2
    Re: Tenma 72-6800 opinions

    Originally posted by notallbad View Post
    Will see if he will accept £50 for it.
    I think that you are dreaming ... this is on Amazon for 400$
    Looks and is cheap.



    Comment

      #3
      Re: Tenma 72-6800 opinions

      It is 2nd hand! And untested at the moment. How would i test it?And only comes with one probe.
      So would it be a good buy?
      Is it a good scope?
      Last edited by notallbad; 06-12-2013, 08:17 PM.

      Comment

        #4
        Re: Tenma 72-6800 opinions

        Like everything, you have to start somewhere. I started with trying to use a 99 cent ebay multimeter and after a while with some education and patience, I now have more quality multimeters than I need.

        So if you are trying to learn more about electronics and how to use a scope, get a working one for as little cost as possible. Afterwards, you can decide if you need a better one or not.

        For 95% of the repairs here on this forum, a simple multimeter will work fine.

        PS. I'm thinking about getting a scope myself in the under $50 range. I'm not going to disclose which one as I don't need any bidding competition.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

          #5
          Re: Tenma 72-6800 opinions

          Originally posted by notallbad View Post
          It is 2nd hand! And untested at the moment. How would i test it?
          If it is a local buy ask a trained friend to assist you, even a school professor in electronics he can do that for you.

          Comment

          Previous template Next
          Working...
          X